Package: firmware-b43-installer
Source: b43-fwcutter
Version: 1:015-9
Installed-Size: 35
Maintainer: Fabrizio Regalli <fabreg@fabreg.it>
Architecture: all
Depends: b43-fwcutter (>= 1:015-9), bzip2, wget
Recommends: linux-image
Conflicts: firmware-b43-lpphy-installer
Description: Installer package for firmware for the b43 driver
 This package installs the firmware needed for usage of the b43 kernel
 driver.
 .
 Supported chipsets:
  - BCM4306/3
  - BCM4311
  - BCM4318
  - BCM4321
  - BCM4322 (only 14e4:432b)
Homepage: http://wireless.kernel.org/en/users/Drivers/b43
Section: contrib/kernel
Priority: optional
Filename: pool/contrib/b/b43-fwcutter/firmware-b43-installer_015-9_all.deb
Size: 8902
MD5sum: bd5d583a8e9e379f680edd254e65ea15
SHA1: dd71ebab73449349b7bac41cb5254bfed7e37fba
SHA256: 4d62607f9c28c3be4987cec31ba0a942007141c35efdc5619750909b88062f7d

Package: firmware-b43-lpphy-installer
Source: b43-fwcutter
Version: 1:015-9
Installed-Size: 34
Maintainer: Fabrizio Regalli <fabreg@fabreg.it>
Architecture: all
Depends: b43-fwcutter (>= 1:015-9), bzip2, wget
Recommends: linux-image
Conflicts: firmware-b43-installer
Description: Installer package for firmware for the b43 driver (LP-PHY version)
 This package installs the firmware needed for usage of the b43 kernel
 driver.
 .
 Supported chipsets:
  - BCM4312 (with Low-Power aka LP-PHY)
Homepage: http://wireless.kernel.org/en/users/Drivers/b43
Section: contrib/kernel
Priority: optional
Filename: pool/contrib/b/b43-fwcutter/firmware-b43-lpphy-installer_015-9_all.deb
Size: 8810
MD5sum: 677250773c2667b8daf1c7097918c6ab
SHA1: 4fc77796e223d593458cefeac519305249573e7e
SHA256: 586ff9b63217888e02b490a1f18a2b50bf3e3d07f49ac8a5d05d25c627b78c4f

Package: firmware-b43legacy-installer
Source: b43-fwcutter
Version: 1:015-9
Installed-Size: 33
Maintainer: Fabrizio Regalli <fabreg@fabreg.it>
Architecture: all
Depends: b43-fwcutter (>= 1:015-9), wget
Recommends: linux-image
Description: Installer package for firmware for the b43legacy driver
 This package installs the firmware needed for usage of the b43legacy kernel
 driver.
 .
 Supported chipsets:
  - BCM4301
  - BCM4306/2
  - BCM4306
Homepage: http://wireless.kernel.org/en/users/Drivers/b43
Section: contrib/kernel
Priority: optional
Filename: pool/contrib/b/b43-fwcutter/firmware-b43legacy-installer_015-9_all.deb
Size: 8372
MD5sum: eb4d886a2513cd6fe59e5750d51f2977
SHA1: 17d62af31b276efa2d8627ac252cc3ac46b5f3ea
SHA256: 23460530177f08829fe81a7c7d547645262abb3e24b6723db5e2bf6d85f4d1d1

Package: bgoffice-dict-downloader
Version: 0.08
Installed-Size: 48
Maintainer: Debian Add-ons Bulgaria Project <debian-addons-bg-maintainers@openfmi.net>
Architecture: all
Depends: curl, debconf (>= 0.5) | debconf-2.0, perl, liburi-perl, libwww-mechanize-perl
Recommends: gbgoffice
Description: download dictionaries for gbgoffice
 bgoffice is a project aimed on creating a full-featured desktop environment,
 translated and localized for Bulgarian users.
 .
 This package contains a helper scripts to automate downloading and
 installation of dictionaries for gbgoffice. These can't be distributed by
 Debian, due to licensing problems.
Section: contrib/text
Priority: extra
Filename: pool/contrib/b/bgoffice-dict-downloader/bgoffice-dict-downloader_0.08_all.deb
Size: 15094
MD5sum: ed08906b1f83a557987edffeb795daba
SHA1: 79293e0b76f07d422dd228bf049212b0957a0db4
SHA256: d232df18d27e1fe0039acfa34f3da8329180d839ff286e05cfcdc50d6625453e

Package: biomaj-watcher
Version: 1.2.0-2
Installed-Size: 227188
Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, openjdk-6-jdk | default-jdk | java6-sdk, tomcat6 (>= 6.0.32-3), biomaj (>= 1.2), debconf, liblog4j1.2-java, libjsch-java (>= 0.1.42), libjdom1-java (>= 1.1), libcommons-lang-java (>= 2.4), libcommons-logging-java (>= 1.1), libquartz-java (>= 1.6), libxerces2-java, unzip, zip, libgnumail-java
Description: BioMAJ web interface
 BioMAJ watcher provide a management interface for the Biomaj tool.
 It runs in a web container (tomcat) and is accessible at address:
 http://myhost:myport/BmajWatcher
 .
 The web interface calls the biomaj binary, and can run bank updates,
 removal and list. A cron manager is integrated to schedule bank update.
 At last, it integrates a bank properties editor to define or modify banks.
 The intterface administrator has special priviledges while anonymous user
 can get an overview of available data.
Homepage: http://biomaj.genouest.org
Section: contrib/science
Priority: optional
Filename: pool/contrib/b/biomaj-watcher/biomaj-watcher_1.2.0-2_all.deb
Size: 34373348
MD5sum: 6cd0f80c002b32806a99bb0ac17124e0
SHA1: 1809159bfe3097857f8da22f8011da5412374a28
SHA256: d047d9e2b4b0577c6e6dbd33eedb257878035ba3ce873743adc21bbcc637f57b

Package: cicero
Version: 0.7.2-1
Installed-Size: 312
Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Architecture: all
Depends: python (>= 2.3), mbrola-fr4, sox
Description: French and English Text-To-Speech for MBROLA
 This Text-To-Speech (TTS) engine speaks French; a preliminary English support
 is also offered.
 The engine uses context-sensitive rules to produce phonemes from the text. It
 relies on MBROLA to generate actual audio output from the phonemes. The TTS
 engine is implemented using the Python programming language.
 .
 The upstream authors have come up with this TTS to try and meet their own needs
 as blind users.
 It's designed to be plugged as output to some screen-review software, firstly
 with BRLTTY.
 They favor speed and intelligibility over perfect pronunciation.
 Cicero is aimed to have a quick response time, the ability to quickly shut-up
 and skip to another utterance, intelligibility where it counts (not perfect
 pronunciation), the ability to track speech progression, relative simplicity
 (hackability) and relative small code size.
Homepage: http://pages.infinit.net/fluxnic/cicero/
Section: contrib/sound
Priority: optional
Filename: pool/contrib/c/cicero/cicero_0.7.2-1_all.deb
Size: 94306
MD5sum: 231cd9a615e59bb0c52f1606401c7609
SHA1: 02c29df532f70823c3810c2a0a351edc7dc8f412
SHA256: eeb7476689f25313a8c8fe4ba5ce580cabb4e9bdc218158fdf6b9fddb098f75d

Package: cl-sql-oracle
Source: cl-sql
Version: 6.0.1-1
Installed-Size: 132
Maintainer: Kevin M. Rosenberg <kmr@debian.org>
Architecture: all
Provides: cl-sql-backend
Depends: cl-sql (= 6.0.1-1), cl-sql-uffi (>= 6.0.1-1)
Description: CLSQL database backend, Oracle
 This package enables you to use the CLSQL data access package
 with Oracle databases.
 CLSQL is a Common Lisp interface to SQL databases.
Homepage: http://clsql.b9.com/
Tag: devel::lang:lisp, devel::lang:sql, implemented-in::lisp, works-with::db
Section: contrib/lisp
Priority: extra
Filename: pool/contrib/c/cl-sql/cl-sql-oracle_6.0.1-1_all.deb
Size: 34506
MD5sum: 4a381422f11b4068a7bbbb81754d9946
SHA1: 1facf2294e5b151964aac5a49ff0950986d50d45
SHA256: 981e1e4df3d881e47360f57d1fc313726dfb9f00ba34e9be526afa53554f1713

Package: cl-umlisp
Version: 1:2007ac.2-6
Installed-Size: 212
Maintainer: Kevin M. Rosenberg <kmr@debian.org>
Architecture: all
Depends: cl-kmrcl, cl-sql, cl-sql-mysql, cl-hyperobject
Description: Common Lisp interface for the Unified Medical Language System
 The Unified Medical Language System is a multi-gigabyte database of
 medical terminology. This a interface for Common Lisp programs that utilizes
 a SQL database engine and Common Lisp meta-classes for efficient access
 and formatting.
Homepage: http://files.b9.com/umlisp/
Tag: devel::lang:lisp
Section: contrib/lisp
Priority: optional
Filename: pool/contrib/c/cl-umlisp/cl-umlisp_2007ac.2-6_all.deb
Size: 37490
MD5sum: 17c3cb6d480ebc6f3cf8958415d02017
SHA1: c786cb0fd62b20d9bb3140745f454ffed6e64175
SHA256: f0a121cb3b67f7d00ffcd9ea728468629a1556d5719237933122f836ca8639e0

Package: cl-umlisp-orf
Version: 3.3.2-3
Installed-Size: 12
Maintainer: Kevin M. Rosenberg <kmr@debian.org>
Architecture: all
Depends: cl-kmrcl, cl-sql, cl-hyperobject
Description: Common Lisp Unified Medical Language System Interface, ORF
 The Unified Medical Language System is a multi-gigabyte database of
 medical terminology. This a interface for Common Lisp programs that utilizes
 a SQL database engine and Common Lisp meta-classes for efficient access
 and formatting. This package supports the Original Release Format
 files (ORF).
Homepage: http://files.b9.com/umlisp-orf/
Tag: devel::lang:lisp, implemented-in::lisp
Section: contrib/lisp
Priority: optional
Filename: pool/contrib/c/cl-umlisp-orf/cl-umlisp-orf_3.3.2-3_all.deb
Size: 3814
MD5sum: 9bce770b4306f5cc175eb38d23e6548d
SHA1: b83738d3a717e00ec140e465094c041a995496ee
SHA256: 32e6fab3791e5818c56372920c9232528215d07360d8ab128a9bb7fd4e215197

Package: cltl
Version: 1.0.26
Installed-Size: 92
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, wget
Suggests: ilisp
Description: Common Lisp the Language, second edition, book (Pre-ANSI)
 This package installs the HTML version of Guy L. Steele book Common
 Lisp the Language, second edition. This book describes a snapshot of
 the Common Lisp language during the period that the ANSI Common
 Lisp standard was created. Thus, this book describe a NON-STANDARD
 version of Common Lisp which is similar to, but is *NOT*, ANSI
 Common Lisp.
 .
 For reference on ANSI Common Lisp, use the Debian package
 "hyperspec".  This book is included in Debian because, while it does
 differ from the ANSI standard, it has more details than the "hyperspec"
 about the design and usage of Lisp.
 .
 This package does not contain the actual HTML files, but rather
 downloads the HTML archive from the Internet and then installs it.
Tag: devel::lang:lisp, implemented-in::lisp
Section: contrib/doc
Priority: optional
Filename: pool/contrib/c/cltl/cltl_1.0.26_all.deb
Size: 8874
MD5sum: 49b6d1731b8bfc5d588197d4519783d3
SHA1: 27bf3fd75af585c481b04b23a3ab2f2845767e51
SHA256: 0d723504f16bc8c0ae01a8a5d0ed23574a32ed043d45fccfe5e27bdeaa8db2fb

Package: crafty-bitmaps
Version: 1.0-1
Installed-Size: 144
Maintainer: Oliver Korff <ok@xynyx.de>
Architecture: all
Enhances: crafty (>= 23.4-3)
Description: bitmap images for crafty chess game annotation mode
 crafty is able to annotate PGN (Portable Game Notation) format chess
 games. This annotaion mode produces output in HTML-format and needs
 graphics to be user viewable. This package provides these graphics.
Section: contrib/games
Priority: extra
Filename: pool/contrib/c/crafty-bitmaps/crafty-bitmaps_1.0-1_all.deb
Size: 8460
MD5sum: 02bcfabd9a9af6dc8626de0c55851b82
SHA1: eccd8c4b1b8dbf1c7f28ec9c1b58b6187f657e32
SHA256: be10f110b411c625401969902d9e7ac1304c71ca581abd0b2355555636b7dfba

Package: crafty-books-medium
Version: 1.0.debian1-2
Installed-Size: 25592
Maintainer: Oliver Korff <ok@xynyx.de>
Architecture: all
Depends: crafty (>= 23.1)
Conflicts: crafty-books-large, crafty-books-medium, crafty-books-small
Description: Medium size opening books for the crafty chess engine
 Opening books that crafty use to evaluate the position during the game.
 This is the medium version, occupying 4MB and containing +7500 games
 computed until the 60th ply.
Tag: game::board, game::board:chess, role::app-data, special::auto-inst-parts, use::gameplaying
Section: contrib/games
Priority: optional
Filename: pool/contrib/c/crafty-books-medium/crafty-books-medium_1.0.debian1-2_all.deb
Size: 12891934
MD5sum: ec8d271e3c77decab7d092a5f83bace3
SHA1: c3f2985c47d144e13b4839566f83ea7353cc0842
SHA256: 21486e25a65bb8462131b7c867d5297fb037af2d44581272897915e2fe9f6146

Package: crafty-books-medtosmall
Version: 1.0.debian1-2
Installed-Size: 3724
Maintainer: Oliver Korff <ok@xynyx.de>
Architecture: all
Depends: crafty (>= 23.1)
Conflicts: crafty-books-large, crafty-books-medium, crafty-books-small
Description: Medium-to-small size opening books for crafty chess engine
 Opening books that crafty use to evaluate the position during the game.
 This is the medium-to-small version, occupying 4MB and containing +7500
 games computed until the 60th ply.
Tag: game::board, game::board:chess, role::app-data, special::auto-inst-parts, use::gameplaying
Section: contrib/games
Priority: optional
Filename: pool/contrib/c/crafty-books-medtosmall/crafty-books-medtosmall_1.0.debian1-2_all.deb
Size: 1900208
MD5sum: b2ade0dfa02106c9e1404023fbabe98d
SHA1: 7b88aeddcd213519ac88a42632dc155be097dc61
SHA256: 9ff0a85e4702d3924628cc2b0229a50c0fbe2ec7e75dce632ac5ac12040ccaa5

Package: crafty-books-small
Version: 1.0.debian1-2
Installed-Size: 1224
Maintainer: Oliver Korff <ok@xynyx.de>
Architecture: all
Depends: crafty (>= 23.1)
Conflicts: crafty-books-large, crafty-books-medium, crafty-books-medtosmall
Description: Small-size opening books for crafty chess engine
 Opening books that crafty use to evaluate the position during the game.
 This is the small version, occupying 1MB and containing +4500 games
 computed until the 60th ply.
Tag: game::board, game::board:chess, role::app-data, special::auto-inst-parts, use::gameplaying
Section: contrib/games
Priority: optional
Filename: pool/contrib/c/crafty-books-small/crafty-books-small_1.0.debian1-2_all.deb
Size: 529228
MD5sum: a94204c04c72ff14363afa65683de998
SHA1: e3845ae913250cea7e54c3812d9480c940c7e552
SHA256: 8c8669fc03a56f0261ed99cd551d543e0488246925a6c4f0281a60e4cee09069

Package: cytadela-data
Source: cytadela
Version: 1.0.1-1
Installed-Size: 119428
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Suggests: fareditor
Description: game data for cytadela
 This package contains data files required by the game Cytadela.
Homepage: http://cytadela.sf.net/
Section: contrib/games
Priority: optional
Filename: pool/contrib/c/cytadela/cytadela-data_1.0.1-1_all.deb
Size: 73038828
MD5sum: a2df2843802005643aaff35a876c38cf
SHA1: 5b008718cad98f3688eaae32726f54e9e92e5fe1
SHA256: 4e8167c5142a49079a64279c1ed8d58bbdeef76b0409fd9fa54ecec60a3586a4

Package: dynagen
Version: 0.11.0-6
Installed-Size: 1688
Maintainer: Erik Wenzel <erik@debian.org>
Architecture: all
Depends: python, python-support (>= 0.90.0), dynamips (>= 0.2.7-0.2.8RC1), python-configobj (>= 4.3.2)
Description: Cisco 7200 Router Emulator Command Line Interface
 Dynagen is a text-based front end for Dynamips, that uses the
 Hypervisor mode for communication with Dynamips. Dynagen simplifies
 building and working with virtual networks:
  * Uses a simple, easy to understand configuration file for specifying
    virtual router hardware configurations
  * Simple syntax for interconnecting routers, bridges, frame-relay and
    ATM switches. No need to deal with NetIOs
  * Can work in a client / server mode, with Dynagen running on your
    workstation communicating to Dynamips running on a back-end server.
    Dynagen can also control multiple Dynamips servers simultaneously for
    distributing large virtual networks across several machines.
  * Provides a management CLI for listing devices, starting, stopping,
    reloading, suspending, and resuming virtual routers.
Homepage: http://dynagen.org/
Tag: admin::configuring, admin::monitoring, implemented-in::python, interface::shell, network::routing, protocol::ip, role::program, scope::utility, use::{checking,configuring,monitor,routing}
Section: contrib/net
Priority: optional
Filename: pool/contrib/d/dynagen/dynagen_0.11.0-6_all.deb
Size: 821156
MD5sum: bd8b135ea1eee767bf19d9ecfcd3ce74
SHA1: da304137f0e918a8c9b3e60c8a7b6feb0ce8a7dd
SHA256: 2e780ae681bb1078fa1f7cfb722f4cbaccd2f7ce0e1978034893c6e0bc4dabdf

Package: dynare-matlab
Source: dynare
Version: 4.2.4-1
Installed-Size: 2453
Maintainer: Debian Octave Group <pkg-octave-devel@lists.alioth.debian.org>
Architecture: all
Depends: dynare, libboost-graph-dev (>= 1.36), gfortran, matlab-support
Description: MATLAB support for Dynare
 Dynare is a software platform for handling a wide class of economic models, in
 particular dynamic stochastic general equilibrium (DSGE) and overlapping
 generations (OLG) models. The models solved by Dynare include those relying on
 the rational expectations hypothesis, wherein agents form their expectations
 about the future in a way consistent with the model. But Dynare is also able
 to handle models where expectations are formed differently: on one extreme,
 models where agents perfectly anticipate the future; on the other extreme,
 models where agents have limited rationality or imperfect knowledge of the
 state of the economy and, hence, form their expectations through a learning
 process. In terms of types of agents, models solved by Dynare can incorporate
 consumers, productive firms, governments, monetary authorities, investors and
 financial intermediaries. Some degree of heterogeneity can be achieved by
 including several distinct classes of agents in each of the aforementioned
 agent categories.
 .
 Dynare offers a user-friendly and intuitive way of describing these models. It
 is able to perform simulations of the model given a calibration of the model
 parameters and is also able to estimate these parameters given a dataset. In
 practice, the user will write a text file containing the list of model
 variables, the dynamic equations linking these variables together, the
 computing tasks to be performed and the desired graphical or numerical
 outputs.
 .
 This package is only useful to users having MATLAB installed on their
 machine. It contains the source of the MEX files and will recompile them using
 the existing MATLAB installation.
Homepage: http://www.dynare.org/
Tag: qa::low-popcon
Section: contrib/math
Priority: optional
Filename: pool/contrib/d/dynare/dynare-matlab_4.2.4-1_all.deb
Size: 452844
MD5sum: 1395e9cd17cfcab861eb45bfe3efd34f
SHA1: c48ffd90f24f84ff4cf667519dcfe2753d8a027d
SHA256: fe5e238212f7a30a0e78e8d54d77090c33da2c30c785dff2c03c6411475a861e

Package: esix
Version: 1-2
Installed-Size: 137
Maintainer: Vince Mulhollon <vlm@debian.org>
Architecture: all
Recommends: simh
Description: PDP-8 Engineering and Scientific Interpreter eXtended
 ESI-X was the first stored program scientific interpreter
 for the PDP-8.
 ESI was designed by Dave Waks on 8/3/66 and was vaguely based on
 RAND's JOSS.
 In 1967 Bob Supnik extended the program to support 8KW of memory,
 and this became the "ESI-extended" or ESI-X
 FOCAL was eventually the successor of ESI-X.
Section: contrib/otherosfs
Priority: optional
Filename: pool/contrib/e/esix/esix_1-2_all.deb
Size: 47044
MD5sum: df6399f75fd692af6b9432d5877017de
SHA1: b106d04706c396a8361419d9dfa863e80e74886c
SHA256: b645d4ff74ddcfc11650efc913e0f06abcf29812b2de33c8c893011492a394a0

Package: festvox-don
Version: 1.4.0-4
Installed-Size: 836
Maintainer: Matthias Urlichs <smurf@debian.org>
Architecture: all
Provides: festival-voice
Depends: festival (>= 1.4.3-9), festlex-poslex (>= 1.3.0), festlex-oald (>= 1.3.0)
Description: minimal British English male speaker for festival
 This is a very small diphone database, which gives poor quality sound
 output but runs very fast.
 .
 The voice contained in this database is a British English male speaker.
Tag: accessibility::speech, culture::british, role::app-data
Section: contrib/sound
Priority: extra
Filename: pool/contrib/f/festvox-don/festvox-don_1.4.0-4_all.deb
Size: 646986
MD5sum: ec0153267ac3ec91ef53327ffd6be1e7
SHA1: 44636bb06fea135b20c5b827cc21de44de727034
SHA256: 8901c5cd4a503f05b155aba6721dae3da919e50cf5952d46622c06ce6c8a71eb

Package: festvox-en1
Source: festvox-mbrola
Version: 1.95-1
Installed-Size: 72
Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Architecture: all
Provides: festival-voice
Depends: mbrola-en1, festival, festlex-oald
Description: mbrola-en1 voice support for festival
 This package lets festival make use of the non-free mbrola-en1 sample-based
 voice instead of its own synthesis voices.
Homepage: http://www.cstr.ed.ac.uk/downloads/festival/1.95/festival-1.95-beta.tar.gz
Section: contrib/sound
Priority: optional
Filename: pool/contrib/f/festvox-mbrola/festvox-en1_1.95-1_all.deb
Size: 5416
MD5sum: 31c7b2d8b02331877240c81469771c11
SHA1: 595b1009a79bc25639379ae8dfa4b6d8b4475218
SHA256: a604aec2567576524eeeca1ef99dacc10fee829063c78988c77e61aeee0f3ab6

Package: festvox-us1
Source: festvox-mbrola
Version: 1.95-1
Installed-Size: 108
Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Architecture: all
Provides: festival-voice
Depends: mbrola-us1, festival
Description: mbrola-us1 voice support for festival
 This package lets festival make use of the non-free mbrola-us1 sample-based
 voice instead of its own synthesis voices.
Homepage: http://www.cstr.ed.ac.uk/downloads/festival/1.95/festival-1.95-beta.tar.gz
Section: contrib/sound
Priority: optional
Filename: pool/contrib/f/festvox-mbrola/festvox-us1_1.95-1_all.deb
Size: 14114
MD5sum: 7e233f2a90c32b17896f52d45635980c
SHA1: d1fcd203ed557e9b6cda63d7818c66f00d2992b5
SHA256: 5310ffbb3483b4a880c82f7eb771e8b84638199c46dc30880e975d5db9f3cdc8

Package: festvox-us2
Source: festvox-mbrola
Version: 1.95-1
Installed-Size: 108
Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Architecture: all
Provides: festival-voice
Depends: mbrola-us2, festival
Description: mbrola-us2 voice support for festival
 This package lets festival make use of the non-free mbrola-us2 sample-based
 voice instead of its own synthesis voices.
Homepage: http://www.cstr.ed.ac.uk/downloads/festival/1.95/festival-1.95-beta.tar.gz
Section: contrib/sound
Priority: optional
Filename: pool/contrib/f/festvox-mbrola/festvox-us2_1.95-1_all.deb
Size: 13160
MD5sum: 485b8cb435be8423ab164f190e430013
SHA1: 031db80905bc3386b57bac4a1981e509d042d056
SHA256: 2ffd2f6865aa9c2eb30e17673bd4bf2913c53418df1f87a9917d5578346de976

Package: festvox-us3
Source: festvox-mbrola
Version: 1.95-1
Installed-Size: 112
Maintainer: Debian Accessibility Team <debian-accessibility@lists.debian.org>
Architecture: all
Provides: festival-voice
Depends: mbrola-us3, festival
Description: mbrola-us3 voice support for festival
 This package lets festival make use of the non-free mbrola-us3 sample-based
 voice instead of its own synthesis voices.
Homepage: http://www.cstr.ed.ac.uk/downloads/festival/1.95/festival-1.95-beta.tar.gz
Section: contrib/sound
Priority: optional
Filename: pool/contrib/f/festvox-mbrola/festvox-us3_1.95-1_all.deb
Size: 13272
MD5sum: 172ec23d3f9d210a416191c67ff07f10
SHA1: 5aac4452b538c110ea16da6380b880234de3f901
SHA256: fe28c42320d1eb3aef2e0ad364864c1f37976f2c46e191cd475149ea2421b129

Package: festvox-rablpc16k
Version: 1.4.0-2
Installed-Size: 7488
Maintainer: Matthias Urlichs <smurf@smurf.noris.de>
Architecture: all
Replaces: festvox-16k
Provides: festvox-16k, festival-voice
Depends: festival (>= 1.4.3-9), festlex-poslex (>= 1.3.0), festlex-oald (>= 1.3.1)
Conflicts: festvox-16k, festvox-rablpc8k
Description: British English male speaker for festival, 16khz sample rate
 This is a diphone database for festival that uses 16k samples for high
 quality sound output. This is a large database (9 MB), and festival will
 convert text to speech more slowly using it, so you might want to install
 festvox-rablpc8k instead if you have low disk space or a slow computer.
 .
 The voice contained in this database is a British English male speaker.
Tag: accessibility::speech, culture::british, role::app-data
Section: contrib/sound
Priority: extra
Filename: pool/contrib/f/festvox-rablpc16k/festvox-rablpc16k_1.4.0-2_all.deb
Size: 5359618
MD5sum: 9eccc673b8ce6be810ad2894159494af
SHA1: 413ad63f2caca26253061c4422b174c93bb0674d
SHA256: 19f6f6de9547905a8d975f30662bd68b5b11187a6ac9f41c99f8784d87dfd905

Package: festvox-rablpc8k
Version: 1.4.0-2
Installed-Size: 4380
Maintainer: Matthias Urlichs <smurf@smurf.noris.de>
Architecture: all
Replaces: festvox-8k
Provides: festvox-8k, festival-voice
Depends: festival (>= 1.4.3-9), festlex-poslex (>= 1.3.0), festlex-oald (>= 1.3.0)
Conflicts: festvox-8k, festvox-rablpc16k
Description: British English male speaker for festival, 8khz sample rate
 This is a diphone database for festival that uses 8k samples so it takes up
 a minimum of disk space. Using this diphone database, festival also converts
 text to speech faster than with the 16k version. However, the sound quality
 is not as good.
 .
 The voice contained in this database is a British English male speaker.
Tag: accessibility::speech, culture::british, role::app-data
Section: contrib/sound
Priority: extra
Filename: pool/contrib/f/festvox-rablpc8k/festvox-rablpc8k_1.4.0-2_all.deb
Size: 3115688
MD5sum: d369d3a56b37c3259749bb7d663dddc0
SHA1: 0e8c83dfc7dfa6575d3d2380cb25b620c18ecf74
SHA256: ea717cff0ff49feb10e05821caaa42f1ac67b2d9291f80d9f64b92f081812d8e

Package: game-data-packager
Version: 29
Installed-Size: 580
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Replaces: doom-package
Provides: doom-package
Depends: fakeroot, unzip | p7zip-full, dynamite (>= 0.1.1-2)
Suggests: jlha-utils | lha
Conflicts: doom-package
Description: Installer for game data files
 Various games are divided into two logical parts: engine
 and data. Often the engine and data are licenced in
 different ways, such that only one half can be distributed
 in Debian.
 .
 game-data-packager is a tool which builds .deb files for game
 data which cannot be distributed in Debian (such as
 commercial game data).
 .
 At the moment, game-data-packager has support for building debs
 for Doom games (Doom, Doom 2 and Final Doom); Quake;
 Quake III Arena; Heretic and Rise of the Triad.
Homepage: http://wiki.debian.org/Games/GameDataPackager
Section: contrib/games
Priority: optional
Filename: pool/contrib/g/game-data-packager/game-data-packager_29_all.deb
Size: 351642
MD5sum: 97cc10a681aafeec421561d036f75d53
SHA1: a1337e1f0e67c150bb90d848a794c217667e46ac
SHA256: 71c225918b57c4ed2771bd24fcfff7a6e620d2f1b2300bb780abee825a49dff1

Package: geoip-database-contrib
Version: 1.5
Installed-Size: 62
Maintainer: Ludovico Cavedon <cavedon@debian.org>
Architecture: all
Replaces: geoip-database
Provides: geoip-database
Depends: wget, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0
Suggests: cron
Conflicts: geoip-database
Description: GeoLite binary database (downloader)
 GeoIP is a C library that enables the user to find the country that any IP
 address or hostname originates from. It uses a file-based database.
 .
 This package contains a script that downloads the latest version of the binary
 flavor of the four MaxMind GeoLite databases (Country, IPv6 Country, City, and
 ASN).
 .
 These databases simply contain IP blocks as keys, and countries/cities/ASNs as
 values, which should be more complete and accurate than using reverse DNS
 lookups.
 .
 The MaxMind database itself is made available under a BSD-like license.
 However, it is distributed directly in binary format and the source code for
 generating it is not provided.
Homepage: http://www.maxmind.com/app/ip-location
Section: contrib/net
Priority: optional
Filename: pool/contrib/g/geoip-database-contrib/geoip-database-contrib_1.5_all.deb
Size: 9670
MD5sum: 1ccdd0126db19e0ca40ee64da4af86a2
SHA1: 2c4a1095a541971d78374ffde4a71a88043d4f58
SHA256: ec2ca210aed7aaa0ec113068789c9bc683f52f19baaafe9822ed350d200eb414

Package: gmbox
Version: 0.4+svn258-1
Installed-Size: 392
Maintainer: Debian Chinese Team <chinese-developers@lists.alioth.debian.org>
Architecture: all
Depends: python2.6 | python2.7, python (>= 2.6.6-7~), python (<< 2.8), python-gtk2
Description: google.cn music box
 This program can download and play music from music.google.cn using
 internal or external applications (such as wget for download and mplayer
 for playing, and of course you can set parameters).
 .
 music.google.cn is a service provided by Google China and the service
 is available and legal only in China mainland.
Homepage: http://code.google.com/p/gmbox/
Section: contrib/sound
Priority: optional
Filename: pool/contrib/g/gmbox/gmbox_0.4+svn258-1_all.deb
Size: 45052
MD5sum: 7214a649c74ec502e79e41e650546c0c
SHA1: b061834c4a16d071050c0eb73fbd515ac2339544
SHA256: 47291025777d6d41727e9a32cb38cdc0ca3d2d330d42c24b48fab67e7d5be8ac

Package: gns3
Version: 0.7.4-1
Installed-Size: 18020
Maintainer: Erik Wenzel <erik@debian.org>
Architecture: all
Depends: python (>= 2.6), python-support (>= 0.90.0), dynamips (>= 0.2.7-0.2.8RC1), python-qt4 (>= 4.3), ucf
Description: graphical network simulator
 graphical network simulator to design network topologies. You may run network
 simulations or configure devices ranging from Cisco routers, Cisco PIX
 firewalls, Cisco ASA Firewalls, Cisco IDS to JunOS routers using Qemu or Pemu.
 It is using dynamips as simulation backend, an IOS emulator which allows
 users to run IOS binary images from Cisco Systems.  Cisco IOS, PixOS or
 JunOS software images are not included.
Homepage: http://www.gns3.net/
Section: contrib/net
Priority: optional
Filename: pool/contrib/g/gns3/gns3_0.7.4-1_all.deb
Size: 3855296
MD5sum: 7b911bb967b46061885a0d51ff3efdb6
SHA1: 2509a2a9d0eaca28fe46e3ba6296395dea08db5a
SHA256: 132f41a50524ee14f195080932c92f9514e86bb66f770aa863f674323bbdff97

Package: gnuvd-gnome
Source: gnuvd
Version: 1.0.11-1
Installed-Size: 76
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: all
Depends: zenity, gnuvd
Description: Query the online Dutch Van Dale dictionary - GNOME frontend
 This program is a frontend for the online Van Dale dictionary,
 http://www.vandale.nl/. It will search any word in the dictionary and return
 its description in Dutch. Van Dale is a well known producer of dictionaries
 in the Netherlands.
 .
 This package provides the GNOME frontend.
Homepage: http://www.djcbsoftware.nl/code/gnuvd/
Tag: culture::dutch, field::linguistics, implemented-in::c, interface::x11, role::program, suite::gnome, uitoolkit::gtk, works-with::dictionary
Section: contrib/text
Priority: optional
Filename: pool/contrib/g/gnuvd/gnuvd-gnome_1.0.11-1_all.deb
Size: 5826
MD5sum: abdc4a13f91ae2ac83ea18595bb2511f
SHA1: df700d2b5be6421ba0d8921ecc175a4860e78c10
SHA256: 806c20c828545e8f1ee6ac3ce0359b0181bc6afec2d01bd3f47bdcbb6878b471

Package: googleearth-package
Version: 0.7.0
Installed-Size: 57
Maintainer: Adnan Hodzic <adnan@foolcontrol.org>
Architecture: all
Depends: wget | curl, dpkg-dev, fakeroot, bzip2, file, x11-common, x11-utils
Description: utility to automatically build a Debian package of Google Earth
 Google Earth is a 3D planet viewer that lets you interactively navigate
 satellite imagery, maps, terrain, and so forth.
 .
 Google Earth is available for GNU/Linux from their web site, but is
 non-free software and is undistributable. It also does not integrate
 well into a Debian system.
 .
 This utility makes it possible to build your own personal Debian
 package of Google Earth. The packaging itself is Free Software, but
 the Google Earth program is governed by the copyright holder (Google),
 so you may be limited as to what you can do with the resulting
 package (i.e. no redistribution, etc). This package will simply help
 you create the package--it is your responsibility to use the resulting
 package responsibly.
Homepage: http://earth.google.com
Tag: devel::packaging, field::geography, implemented-in::shell, interface::commandline, role::program, scope::utility, use::downloading
Section: contrib/misc
Priority: optional
Filename: pool/contrib/g/googleearth-package/googleearth-package_0.7.0_all.deb
Size: 12018
MD5sum: eab9655b710285291d4e002e48463bdf
SHA1: ae64abf50555eb82cf622cf6e3ef11ca247107b9
SHA256: bb733a612d894e55855355b521b11f21914b5437bc3f1af53fcb4b3d5ea7d9b3

Package: hts-voice-nitech-jp-atr503-m001
Version: 1.04-1
Installed-Size: 1225
Maintainer: Koichi Akabe <vbkaisetsu@gmail.com>
Architecture: all
Description: Japanese male voice data for Open JTalk
 This is a Japanese male voice data for Open JTalk, a Hidden Markov Model
 based speech synthesis system (a.k.a. HTS) for Japanese.
 .
 This voice data was trained by using the HTS voice data "NIT ATR503 M001"
 and released by HTS Working Group as a part of Open JTalk.
Homepage: http://open-jtalk.sourceforge.net
Section: contrib/sound
Priority: extra
Filename: pool/contrib/h/hts-voice-nitech-jp-atr503-m001/hts-voice-nitech-jp-atr503-m001_1.04-1_all.deb
Size: 830800
MD5sum: 326342163fc5c2745932f9c3677c3fe0
SHA1: 2b86f0d80d5d1b8c94df756e437a32f092b3b299
SHA256: 25fb0ef84a3c05d05c7acda5675d2d6d33d3acba01f287d3ae5228227be077aa

Package: hyperspec
Version: 1.30+nmu1
Installed-Size: 88
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, wget
Description: The Common Lisp ANSI-standard Hyperspec
 This is a installer package for the html-ed version of the ANSI standard
 for Common Lisp. Note that these pages are only FYI and are not valid
 as a reference.
 But for all intents and purposes this is a good enough reference for
 daily work.
Tag: devel::lang:lisp
Section: contrib/doc
Priority: optional
Filename: pool/contrib/h/hyperspec/hyperspec_1.30+nmu1_all.deb
Size: 8654
MD5sum: d2d3861b09b82d2b150c55df21837971
SHA1: cf9f5213ce94d1f94b71d9246436d260873280dc
SHA256: e84685a49899b08da9eda3729276a123e430416e39181835fadd69ae1a46069f

Package: imgtex
Version: 0.20050123-8
Installed-Size: 68
Maintainer: Atsuhito KOHDA <kohda@debian.org>
Architecture: all
Depends: dvipng (>= 1.5-2), libapache2-mod-fastcgi, libfcgi-perl, perl, texlive-latex-extra
Description: provides yet another math-on-the-web solution
 imgTeX uses dvipng and FastCGI to embed LaTeX equations within HTML code.
 It runs very fast and renders high quality math equations.
 .
 Home page of imgTeX <http://www.eaflux.com/imgtex/>
Section: contrib/utils
Priority: optional
Filename: pool/contrib/i/imgtex/imgtex_0.20050123-8_all.deb
Size: 6140
MD5sum: 9bcfe321ffe5ea9b23b1d0b2c89ae4c9
SHA1: bfaf57db547dc0a4af16470d34c53b0f0514fb1c
SHA256: ed53b5dacb2a65356dee98148a4638179bb8f8c8c0b84ff1d4e7ab221b5e4fb3

Package: jspwiki
Version: 2.8.0-4
Installed-Size: 5892
Maintainer: Debian Java Maintainers <pkg-java-maintainers@lists.alioth.debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, libgnujaf-java, libcommons-codec-java, libcommons-fileupload-java, libcommons-httpclient-java, libcommons-io-java, libcommons-lang-java, libcommons-logging-java, libjaxen-java, libjdom1-java, liblog4j1.2-java, liblucene2-java, libnekohtml-java, liboro-java, liboscache-java
Suggests: rcs
Description: WikiWikiWeb clone written in Java
 JSPWiki is a simple WikiWiki clone to be run in a Java servlet container
 (eg. Tomcat).  It keeps all of its formatting in Java Server Pages (JSP)
 files, and uses a custom Java class called 'com.ecyrd.jspwiki.WikiEngine'
 to all interfacing with the Wiki system.
Homepage: http://www.jspwiki.org
Tag: implemented-in::java, interface::web, web::wiki
Section: contrib/web
Priority: optional
Filename: pool/contrib/j/jspwiki/jspwiki_2.8.0-4_all.deb
Size: 4417066
MD5sum: 99fcfab5d2f593330c571f931fc9db72
SHA1: fecc812f53f8485b5adcc3893c8fbd0cb76a8357
SHA256: 9d6e407c7cb178727b83f48a1773e3eb907bec636529458bb1dc84642f2063bc

Package: kcemu-common
Source: kcemu
Version: 0.5.1+dfsg-2
Installed-Size: 7000
Maintainer: Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Architecture: all
Description: KC 85/4 emulator - common files
 KCemu is an emulator for the KC85 homecomputer series and other
 Z80 based microcomputers like Z1013, LC80, Polycomputer 880 and
 BIC A5105. The emulation supports a number of additional hardware,
 e.g. floppy disk drives and extended graphic modules.
 .
 This package contains files common to all architectures.
 .
 The Debian package does not contain the ROM images required to
 run the emulated machines. Please refer to the README.Debian
 file for more.
 .
 Some alternate keywords for the above:
 KC85, KC87, LC80, Z1013, A5105, Polycomputer 880
 .
 For original programs and general information about the
 emulated computer systems have a look at http://www.kc-club.de/
 and http://www.kc85emu.de/.
Homepage: http://kcemu.sourceforge.net/
Section: contrib/otherosfs
Priority: optional
Filename: pool/contrib/k/kcemu/kcemu-common_0.5.1+dfsg-2_all.deb
Size: 2152248
MD5sum: 3a6855659fa83a0ce55d90a5280b0dfd
SHA1: 4f51016bb4e2fb43f4046056339537675c8f0046
SHA256: 32d0b563e28ec3911880e385a6867100359141f00f302fef8730704daff516c6

Package: opencl-headers
Source: khronos-opencl-headers
Version: 1.1-2010.07.15-2
Installed-Size: 292
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: all
Replaces: nvidia-cuda-dev (<< 3.1-1~), nvidia-libopencl1-dev (<< 256.53-2~)
Breaks: nvidia-cuda-dev (<< 3.1-1~), nvidia-libopencl1-dev (<< 256.53-2~)
Description: OpenCL (Open Computing Language) header files
 OpenCL (Open Computing Language) is a multi-vendor open standard for
 general-purpose parallel programming of heterogeneous systems that include
 CPUs, GPUs and other processors.
 .
 This package provides the development header files for the OpenCL API 1.0
 as published by The Khronos Group Inc.  The corresponding specification and
 documentation can be found on the Khronos website.
Homepage: http://www.khronos.org/registry/cl/
Section: contrib/libdevel
Priority: extra
Filename: pool/contrib/k/khronos-opencl-headers/opencl-headers_1.1-2010.07.15-2_all.deb
Size: 38598
MD5sum: 5b13fb3d73193929ab3edc99f22c8761
SHA1: 77b0fbbc8be3b6281874d0a3189b7a63f0b19a15
SHA256: a36677f3f87d3386d1c8257b48ea6f5448d83af1bf8a6853c0484ebe7b74ba2e

Package: matlab-gdf
Source: libgdf
Version: 0.1.1-1
Installed-Size: 156
Maintainer: NeuroDebian Team <team@neuro.debian.net>
Architecture: all
Depends: libgdf-dev (>= 0.1.1-1), matlab-support
Description: IO library for the GDF -- Matlab interface
 GDF (General Dataformat for Biosignals) is intended to provide a generic
 storage for biosignals, such as EEG, ECG, MEG etc.
 .
 This package builds Matlab bindings for GDF at installation
 time. Note that this package depends on Matlab -- a commercial
 software that needs to be obtain and installed separately.
Homepage: http://sourceforge.net/projects/libgdf
Section: contrib/science
Priority: extra
Filename: pool/contrib/libg/libgdf/matlab-gdf_0.1.1-1_all.deb
Size: 21514
MD5sum: 8e73ec7d468cbaf0c321b5be530d5aa5
SHA1: ad5a71595739c5e113095f69b1dc15640993b1a5
SHA256: e609447be1b34ed4a7aa6225ac7a36faf595499a11456c4c76216eae5257f11c

Package: libgooglecharts-ruby
Version: 1.3.6-1
Installed-Size: 32
Maintainer: Ryan Niebur <ryanryan52@gmail.com>
Architecture: all
Depends: libgooglecharts-ruby1.8
Description: Ruby library to create sexy charts using the Google API (dummy package)
 Googlecharts is a nice and simple wrapper for the Google Chart API.
 .
 This package is a dependency package, which depends on Debian's
 default Ruby version (currently 1.8.x).
Homepage: http://googlecharts.rubyforge.org/
Tag: qa::low-popcon
Section: contrib/ruby
Priority: optional
Filename: pool/contrib/libg/libgooglecharts-ruby/libgooglecharts-ruby_1.3.6-1_all.deb
Size: 2330
MD5sum: 06cb0b1317b6920014856674e4cbf420
SHA1: deb94596c15a2ae50fd0a1140d5f42a261437102
SHA256: d9683fb6e162ccff92037895cfff5ccd9b6202aa9e8aaf619b8e6258ce60a108

Package: libgooglecharts-ruby1.8
Source: libgooglecharts-ruby
Version: 1.3.6-1
Installed-Size: 72
Maintainer: Ryan Niebur <ryanryan52@gmail.com>
Architecture: all
Depends: libruby1.8
Description: Ruby library to create sexy charts using the Google API
 Googlecharts is a nice and simple wrapper for the Google Chart API.
Homepage: http://googlecharts.rubyforge.org/
Tag: qa::low-popcon
Section: contrib/ruby
Priority: optional
Filename: pool/contrib/libg/libgooglecharts-ruby/libgooglecharts-ruby1.8_1.3.6-1_all.deb
Size: 6910
MD5sum: 051c006a4507347a616b207a180a9155
SHA1: e1f9a58110aa3efdaf85e6d79fe7e9ddf0b66d75
SHA256: b75dca5611838b20835d071f9ad8f94a216aea83632191e3129350766678fc32

Package: libgrinvin-core-java
Version: 1.2-2
Installed-Size: 840
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: gij | java-gcj-compat | java1-runtime | java2-runtime, libgui-commands-java, libjdom1-java, libjmathtex-java, libswirl-java (>= 1.1), javahelp2, libbatik-java
Description: interactive software package for studying graphs (core libraries)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the main (core) libraries.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-core-java/libgrinvin-core-java_1.2-2_all.deb
Size: 710502
MD5sum: 82e8df6f05397ad6402219eff7e81b1a
SHA1: 8880a9b567d12b35c2c1800e7aac0b0c8ba85bcf
SHA256: 9b66599b33c6233b8a6d38668c81ef49d4ab5a4e387643c737946c2ffa97e832

Package: libgrinvin-core-java-doc
Source: libgrinvin-core-java
Version: 1.2-2
Installed-Size: 32
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Description: interactive software package for studying graphs (API docs)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the Javadoc API documentation.
Homepage: http://www.grinvin.org/
Tag: devel::doc, made-of::html, qa::low-popcon, role::documentation
Section: contrib/doc
Priority: optional
Filename: pool/contrib/libg/libgrinvin-core-java/libgrinvin-core-java-doc_1.2-2_all.deb
Size: 2734
MD5sum: b3286eaafc3c955872b29f7fa95b1172
SHA1: a665751958fb200674d129b0223779e7c4eed6e1
SHA256: 25e60b8baddabbe7c09c952d09071c0d36a9228e25f5544a0c721016e17cbe74

Package: libgrinvin-factories-java
Version: 1.2-2
Installed-Size: 144
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: java-gcj-compat | java1-runtime | java2-runtime, libgrinvin-core-java (>= 1.2)
Description: interactive software package for studying graphs (graph factories)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the graph factory libraries.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-factories-java/libgrinvin-factories-java_1.2-2_all.deb
Size: 92502
MD5sum: c80a5764aa843ecdbdc6b461f3739660
SHA1: 50332a28397dd5197c52b39720e3a4193e99531b
SHA256: 1cdf4d67da1714d88a93251cb14545f0d2d313765bbc8ce07f4a49b82fa1e1c2

Package: libgrinvin-generators-java
Version: 1.0.1-2
Installed-Size: 72
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: java-gcj-compat | java1-runtime | java2-runtime, libgrinvin-core-java (>= 1.2)
Description: interactive software package for studying graphs (graph generators)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the graph generator libraries.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-generators-java/libgrinvin-generators-java_1.0.1-2_all.deb
Size: 29092
MD5sum: b264fd95a7917f55d121cdf5dc4ac2bd
SHA1: f4261cad021d1c43e5380d3a3c568c0be6721ced
SHA256: 127c290eca26f75aa03a7bf1b7b164d5753b87d773969d54ae8a31a202620a75

Package: libgrinvin-graphs-java
Version: 1.2-2
Installed-Size: 276
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Recommends: libgrinvin-core-java
Description: interactive software package for studying graphs (standard graphs)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the standard graphs.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-graphs-java/libgrinvin-graphs-java_1.2-2_all.deb
Size: 169126
MD5sum: b3f27fe9f704bbbb59d0d3fd6bf9341e
SHA1: d13aac29b48be6ef8c7a09480910b263750691d6
SHA256: e36bc377c4fe4609184f6c147e51210ec575a3d8d781821cf543ea7d435a5d2a

Package: libgrinvin-help-java
Version: 1.2-2
Installed-Size: 188
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Recommends: libgrinvin-core-java
Description: interactive software package for studying graphs (help files)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the online help files.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-help-java/libgrinvin-help-java_1.2-2_all.deb
Size: 107902
MD5sum: 3d55f2d8fc4c8dfe43417d6f2ea0147d
SHA1: 51f56ca1cf9ebd1257baf2f8e7d7d7c30fa8bef5
SHA256: 4b45f5a4cf8ad56f6c324a07a6d53547b650ea572b6b813694a1489e4da8f05c

Package: libgrinvin-invariants-java
Version: 1.2-2
Installed-Size: 232
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: java-gcj-compat | java1-runtime | java2-runtime, libgrinvin-core-java (>= 1.2)
Description: interactive software package for studying graphs (graph invariants)
 GrInvIn is a software package for studying graphs, their properties
 (invariants) and the relations between these properties. It has been designed
 to optimally support the user in learning graph theory by means of examples
 and by experimenting with graphs and their properties.
 .
 This package contains the invariant computing libraries.
Homepage: http://www.grinvin.org/
Section: contrib/java
Priority: optional
Filename: pool/contrib/libg/libgrinvin-invariants-java/libgrinvin-invariants-java_1.2-2_all.deb
Size: 163676
MD5sum: e620e26d2d092d86b93625eee459011d
SHA1: 1cd2f7698d41d11bf9d4633b224947c83bbd0d57
SHA256: 16d7324b8bb1a176bdc59ead8c7d1ca9963cf07c48f26c2de4f9f6cfce7c5a24

Package: libthrust-dev
Source: libthrust
Version: 1.5.0-1
Installed-Size: 2237
Maintainer: Andreas Beckmann <debian@abeckmann.de>
Architecture: all
Recommends: nvidia-cuda-toolkit
Description: Thrust - C++ template library for CUDA
 Thrust is a CUDA library of parallel algorithms with an interface
 resembling the C++ Standard Template Library (STL). Thrust provides a
 flexible high-level interface for GPU programming by providing a rich
 collection of data parallel primitives such as scan, sort, and reduce.
 It then automatically selects an efficient implementation without
 requiring source modifications.
 .
 The Compute Unified Device Architecture (CUDA) enables NVIDIA
 graphics processing units (GPUs) to be used for massively parallel
 general purpose computation.
Homepage: http://thrust.googlecode.com/
Section: contrib/libdevel
Priority: extra
Filename: pool/contrib/libt/libthrust/libthrust-dev_1.5.0-1_all.deb
Size: 305602
MD5sum: e8fa67e3752f3750dc886f7463254cb9
SHA1: fb58bed3a43a05df14f2fbfb18c7523a0188753a
SHA256: 8569fcc2f192ffd7c1b452ff2f4194f3f4d92de0ca59358e55239fe8c5a9c432

Package: linux-wlan-ng-firmware
Source: linux-wlan-ng
Version: 0.2.9+dfsg-4
Installed-Size: 228
Maintainer: Tormod Volden <debian.tormod@gmail.com>
Architecture: all
Depends: linux-wlan-ng (>= 0.2.9+dfsg-4), linux-wlan-ng-source (>= 0.2.9+dfsg-4), build-essential, debhelper, subversion, fakeroot
Description: firmware files used by the linux-wlan-ng driver
 linux-wlan-ng is a set of drivers and utilities that is intended to
 provide the full range of IEEE 802.11 MAC management capabilities for use
 in user-mode utilities and scripts. The package currently supports the
 Intersil 802.11b Prism2, Prism2.5, and Prism3 reference designs for
 PCMCIA, PCI, and USB. Additionally, the package includes support for the
 PLX9052 based PCI to PCMCIA adapter with a few different PCMCIA cards.
 .
 This package doesn't contain the firmware files, but a script to download
 the upstream source tarball and build a deb that contains them. Note that
 only some adapters really need a firmware file and that firmware files are
 not completely free (in the sense of freely redistributable), that's why
 this package exists.
 .
 For newer kernels (2.6.31+) which have the in-tree prism2_usb driver,
 you can install the prism2-usb-firmware-installer package instead.
Tag: admin::hardware, role::data
Section: contrib/kernel
Priority: extra
Filename: pool/contrib/l/linux-wlan-ng/linux-wlan-ng-firmware_0.2.9+dfsg-4_all.deb
Size: 54632
MD5sum: 2acb81eddecb97f79039762d5f9428e7
SHA1: a5149fb1abeaaa81c2b0fad9e04e32c1d977bcb8
SHA256: d93cf8a4fd7393a011bd89c434982401e97bf4fb5899b7250d59242b1659b12f

Package: mahara-mediaplayer
Source: mahara
Version: 1.4.1-1
Installed-Size: 2307
Maintainer: Mahara Packaging Team <mahara-packaging@lists.launchpad.net>
Architecture: all
Depends: mahara (>= 1.4.1-1)
Conflicts: mahara-apache
Description: Electronic portfolio, weblog, and resume builder - internal media player
 Mahara is a fully featured electronic portfolio, weblog, resume builder and
 social networking system, connecting users and  creating online communities.
 .
 Mahara is designed to provide users with the tools to create a personal and
 professional learning and development environment.
 .
 This package includes a flash-based internal media player block.
Homepage: http://www.mahara.org
Section: contrib/web
Priority: optional
Filename: pool/contrib/m/mahara/mahara-mediaplayer_1.4.1-1_all.deb
Size: 457524
MD5sum: 73be549d38c81cc17cd18571a257e3ca
SHA1: 32dff749472e59a2ac78e255ab0882d94ca03c96
SHA256: 6e84e30aa5a585f9d8179f9fbb57f5e99af8f809dd774f0b4767d17c018986a1

Package: mathematica-fonts
Version: 13
Installed-Size: 112
Maintainer: Atsuhito KOHDA <kohda@debian.org>
Architecture: all
Replaces: ttf-mathematica4.1 (<< 9)
Provides: ttf-mathematica4.1
Depends: unzip
Pre-Depends: debconf (>= 0.5) | debconf-2.0
Conflicts: ttf-mathematica4.1 (<< 9)
Description: Installer of Mathematica fonts
 This package downloads Mathematica fonts through an internet
 and installs them, because the license prohibits distribution of
 the fonts.  NOTE the fonts might be removed from a web site so it
 might happen that you failed to download the fonts.
 .
 This package will install only AFM, TTF and Type1 at present.
Section: contrib/fonts
Priority: extra
Filename: pool/contrib/m/mathematica-fonts/mathematica-fonts_13_all.deb
Size: 26362
MD5sum: 6dfa4b8888d9df6e50a09a848d5a6f74
SHA1: ad823f15fb0b1bba2b1403a85905eeb66d90fe29
SHA256: 608d673c7d46d2edcadb7f9156965b3cccfa6632b9556aa06749f80b8faf354c

Package: ttf-mathematica4.1
Source: mathematica-fonts
Version: 13
Installed-Size: 36
Maintainer: Atsuhito KOHDA <kohda@debian.org>
Architecture: all
Depends: mathematica-fonts
Description: transitional dummy package
 This dummy package is provided for a smooth transition from the
 previous ttf-mathematica4.1 package to the mathematica-fonts package.
 .
 It may be safely removed after installation.
Tag: role::dummy
Section: contrib/fonts
Priority: extra
Filename: pool/contrib/m/mathematica-fonts/ttf-mathematica4.1_13_all.deb
Size: 3562
MD5sum: 6abd53dbdf8b98cc8d2f606a80a6225b
SHA1: f8fcb87d1e40ca2c1ac1345a09d1788ad3052883
SHA256: 77c290653f4cb339cf485ed51dbcc23b6c57c171f9e872e3c3240723d2102c50

Package: matlab-support
Version: 0.0.17
Installed-Size: 54
Maintainer: NeuroDebian Team <team@neuro.debian.net>
Architecture: all
Replaces: matlab (<= 0.0.14~)
Depends: debconf (>= 1.3.22) | cdebconf (>= 0.43), debconf (>= 0.5) | debconf-2.0, libxp6, sudo
Recommends: libstdc++6-4.4-dev | libstdc++-dev
Conflicts: matlab (<= 0.0.14~)
Description: distro integration for local MATLAB installations
 This package does not provide MATLAB. Instead, it configures an
 existing MATLAB installation to integrate more comfortably in
 a Debian installation.
 .
 Currently it provides /usr/bin/matlab through the alternatives
 system, offers to work around incompatibilities between the libraries
 bundled with MATLAB and system libraries, and provides a helper
 utility meant to be used by other packages to compile MEX extensions.
 .
 Install this if you would like your MATLAB installation to behave more
 like an ordinary Debian package. Other packages may depend on
 this one if they install MATLAB code, for example in order to
 compile MEX extensions.
Section: contrib/devel
Priority: optional
Filename: pool/contrib/m/matlab-support/matlab-support_0.0.17_all.deb
Size: 28582
MD5sum: aaff09db832cd8266fa369e202bb60bf
SHA1: 6627f57c204e7a318f73c31e2331999db7649e24
SHA256: 439dfe4bfbe690c6b12dca34cd584550ebb9c29348d04bf6f669d9df569def76

Package: mess-desktop-entries
Version: 0.2-2
Installed-Size: 188
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: all
Depends: mess
Enhances: mess
Description: Desktop entries for MESS ROMs
 This is a collection of desktop entries to handle ROM files for certain game
 consoles. They use the Multiple Emulator Super System (MESS) to start a
 game by simply double-clicking the ROM file from a file manager.
Section: contrib/gnome
Priority: optional
Filename: pool/contrib/m/mess-desktop-entries/mess-desktop-entries_0.2-2_all.deb
Size: 9916
MD5sum: f539ab391d089e4d8033ae344f0427e6
SHA1: 8c1903e92fef23f8fbc9c5ea4556223af7a063ae
SHA256: 4f14c201f26352426cb28aebe1dfeb6c6f2a512451e7b2f1296d1ffeb23c9d0a

Package: ttf-mscorefonts-installer
Source: msttcorefonts
Version: 3.4
Installed-Size: 71
Maintainer: Thijs Kinkhorst <thijs@debian.org>
Architecture: all
Provides: msttcorefonts
Depends: wget, cabextract, xfonts-utils, debconf (>= 0.5) | debconf-2.0
Recommends: fonts-liberation
Description: Installer for Microsoft TrueType core fonts
 This package allows for easy installation of the Microsoft True Type
 Core Fonts for the Web including:
 .
   Andale Mono
   Arial Black
   Arial (Bold, Italic, Bold Italic)
   Comic Sans MS (Bold)
   Courier New (Bold, Italic, Bold Italic)
   Georgia (Bold, Italic, Bold Italic)
   Impact
   Times New Roman (Bold, Italic, Bold Italic)
   Trebuchet (Bold, Italic, Bold Italic)
   Verdana (Bold, Italic, Bold Italic)
   Webdings
 .
 You will need an Internet connection to download these fonts if you
 don't already have them.
 .
 NOTE: the package fonts-liberation contains free variants of the Times,
 Arial and Courier fonts. It's better to use those instead unless you
 specifically need one of the other fonts from this package.
Tag: made-of::font, role::app-data, use::downloading, x11::font
Section: contrib/fonts
Priority: optional
Filename: pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.4_all.deb
Size: 34450
MD5sum: 057997babbba06344c69cd106f543cb6
SHA1: f6c44a173c75788262c08042b063a37c9e589b12
SHA256: 85b27aab00642a7034a542b716a4003047c5df6be76848d823416e3183a0ff49

Package: netdisco-mibs-installer
Version: 1.5
Installed-Size: 92
Maintainer: Oliver Gorwits <oliver.gorwits@oucs.ox.ac.uk>
Architecture: all
Depends: perl, libwww-perl
Suggests: netdisco-frontend, netdisco-backend
Description: Netdisco MIB bundle installer package
 Netdisco is an Open Source web-based network management
 tool designed for moderate-large networks. Using SNMP it
 locates the switch port of an end-user system by IP or MAC
 address. Layer2 topology discovery via CDP. Device inventory
 by OS/model + more.
 .
 This package contains download and install helper programs
 for the NetDisco MIB bundle, which cannot be redistributed in
 Debian.
Section: contrib/net
Priority: extra
Filename: pool/contrib/n/netdisco-mibs-installer/netdisco-mibs-installer_1.5_all.deb
Size: 12514
MD5sum: 1b64f87ecd4c970ad4c4fc7d9c453299
SHA1: 394837847021058c926f47eb973b3c2b25446995
SHA256: 95d35ed328fd46621358aad975685cf755183b4ad2dc8cef001dc7d58dcee4cf

Package: opendict-plugins-lingvosoft
Source: opendict-lingvosoft
Version: 0.8-2
Installed-Size: 580
Maintainer: Kęstutis Biliūnas <kebil@kaunas.init.lt>
Architecture: all
Depends: python (>= 2.3), python-support (>= 0.7.1), opendict (>= 0.5.7)
Description: plugins for OpenDict - LingvoSoft Online Dictionaries
 This plugin fetches translations from http://www.lingvozone.com
 for use by OpenDict program and provides these dictionaries:
   English <=> Albanian
   English <=> Arabic
   English <=> Azeri
   English <=> Bosnian
   English <=> Bulgarian
   English <=> Chinese-Simplified
   English <=> Chinese-Traditional
   English <=> Croatian
   English <=> Czech
   English <=> Dutch
   English <=> Estonian
   English <=> Finnish
   English <=> French
   English <=> German
   English <=> Greek
   English <=> Hebrew
   English <=> Hungarian
   English <=> Indonesian
   English <=> Italian
   English <=> Japanese
   English <=> Japanese Kana
   English <=> Japanese Kanji
   English <=> Japanese Romaji
   English <=> Korean
   English <=> Latvian
   English <=> Lithuanian
   English <=> Persian(Farsi)
   English <=> Polish
   English <=> Portuguese
   English <=> Romanian
   English <=> Russian
   English <=> Serbian
   English <=> Slovak
   English <=> Spanish
   English <=> Swedish
   English <=> Tagalog (Philippines)
   English <=> Thai
   English <=> Turkish
   English <=> Ukrainian
   English <=> Vietnamese
   English <=> Yiddish
   English -> MultiLingual
Python-Version: 2.4, 2.3, 2.5
Tag: culture::russian, field::linguistics, made-of::dictionary, role::app-data, use::{browsing,checking,gameplaying,learning,searching}
Section: contrib/text
Priority: optional
Filename: pool/contrib/o/opendict-lingvosoft/opendict-plugins-lingvosoft_0.8-2_all.deb
Size: 11060
MD5sum: c38dbe29398cec8b7d20bc833efb6507
SHA1: 076a8cc14e511bf45b7ef8a4ce9399a272b99868
SHA256: ac39a4f45135910b90972096dea2c3742a329bf44c9541c097b7b6b7be529859

Package: ora2pg
Version: 8.9-1
Installed-Size: 299
Maintainer: Julián Moreno Patiño <darkjunix@gmail.com>
Architecture: all
Depends: perl, libcompress-zlib-perl, libdbd-oracle-perl, libdbi-perl, libdbd-pg-perl, libstring-random-perl
Recommends: postgresql-client
Description: Oracle to PostgreSQL database schema converter
 This package contains a Perl module and a companion script to convert an
 Oracle database schema to PostgreSQL and to migrate the data from an
 Oracle database to a PostgreSQL database.
Homepage: http://ora2pg.projects.postgresql.org/
Tag: implemented-in::perl, qa::low-popcon, role::program, scope::utility, use::converting, works-with::db
Section: contrib/misc
Priority: extra
Filename: pool/contrib/o/ora2pg/ora2pg_8.9-1_all.deb
Size: 96054
MD5sum: ca25dcb94d1a7e0b2e14e6653c54c904
SHA1: 9ff9216a96fe6c45369b3940a98c34404d539c5e
SHA256: 0e3d9706f1dc023fb9bfa85a7e81d67a95fc3f576e3fc2245aa849972d7a6aff

Package: phoronix-test-suite
Version: 3.4.0-1
Installed-Size: 2500
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: php5-cli, php5-gd
Description: comprehensive testing and benchmarking platform
 The Phoronix Test Suite is the most comprehensive testing and
 benchmarking platform available for the Linux operating system. This
 software is designed to effectively carry out both qualitative and
 quantitative benchmarks in a clean, reproducible, and easy-to-use
 manner. The Phoronix Test Suite consists of a lightweight processing
 core (pts-core) with each benchmark consisting of an XML-based
 profile with related resource scripts. The process from the benchmark
 installation, to the actual benchmarking, to the parsing of important
 hardware and software components is heavily automated and completely
 repeatable, asking users only for confirmation of actions.
Homepage: http://www.phoronix-test-suite.com/
Section: contrib/utils
Priority: optional
Filename: pool/contrib/p/phoronix-test-suite/phoronix-test-suite_3.4.0-1_all.deb
Size: 422942
MD5sum: 7e58248e9de99a150aa7934ebb5608d1
SHA1: 6e06e27a837d197edf2436a0cb6ec008300f5473
SHA256: a24235878dcd081193ec8d169d19e1c2b171e170c419ae9248161c42bebb756f

Package: premail
Version: 0.46-9
Installed-Size: 344
Maintainer: Steve Kostecke <steve@debian.org>
Architecture: all
Depends: pgp, mail-reader
Description: An e-mail privacy package.
 Premail adds support for encrypted e-mail to your mailer, using plain PGP,
 PGP/MIME, MOSS, or S/MIME.  In addition, premail provides a seamless,
 transparent interface to the anonymous remailers, including full support
 for Mixmaster remailers and the nymservers.  Nymservers provide
 cryptographically protected, fully anonymous accounts for both sending and
 receiving e-mail.
Tag: security::cryptography
Section: contrib/mail
Priority: optional
Filename: pool/contrib/p/premail/premail_0.46-9_all.deb
Size: 108676
MD5sum: 074fb7849a47f94200fc4c65a226c8e2
SHA1: e86850eab409c9c187191f7fe5d90ecde2de2eb4
SHA256: 1c1adcbc8ab2da5a9d3e6bcc01bbeb1fafde4e8cca0efd793c85d3e313ee3279

Package: pvcam-dkms
Version: 4.1.0-1
Installed-Size: 164
Maintainer: Bas Wijnen <wijnen@debian.org>
Architecture: all
Depends: dkms (>= 2.1.0.0)
Recommends: libpvcam (= 4.1.0-1)
Description: kernel module for Coolsnap pci card
 Libpvcam is a library for using the Coolsnap ES camera. It requires
 this module to communicate with the hardware.
 .
 This package contains the dkms sources. When installed, it will build
 the module for your kernel.
Section: contrib/kernel
Priority: extra
Filename: pool/contrib/p/pvcam-dkms/pvcam-dkms_4.1.0-1_all.deb
Size: 22096
MD5sum: 896c917a6d5794d2a2e4d2fdbd7de3ff
SHA1: 9a134bd5a9576e62c2244ede74aecf681f894f7a
SHA256: 7251ee115e4cf315f236ab337f848a0f1d2d2a65aa52021446157b41e1785880

Package: python-pycuda-doc
Source: pycuda
Version: 2011.1.3+git20110814-1
Installed-Size: 804
Maintainer: Tomasz Rybak <bogomips@post.pl>
Architecture: all
Depends: libjs-sphinxdoc (>= 1.0)
Recommends: python-pycuda, nvidia-cuda-doc
Description: module to access Nvidia‘s CUDA parallel computation API (documentation)
 PyCUDA lets you access Nvidia‘s CUDA parallel computation API from Python.
 Several wrappers of the CUDA API already exist–so what’s so special about
 PyCUDA?
  * Object cleanup tied to lifetime of objects. This idiom, often called
    RAII in C++, makes it much easier to write correct, leak- and crash-free
    code.  PyCUDA knows about dependencies, too, so (for example) it won’t
    detach from a context before all memory allocated in it is also freed.
  * Convenience. Abstractions like pycuda.driver.SourceModule and
    pycuda.gpuarray.GPUArray make CUDA programming even more convenient than
    with Nvidia’s C-based runtime.
  * Completeness. PyCUDA puts the full power of CUDA’s driver API at your
    disposal, if you wish.
  * Automatic Error Checking. All CUDA errors are automatically translated
    into Python exceptions.
  * Speed. PyCUDA’s base layer is written in C++, so all the niceties
    above are virtually free.
  * Helpful Documentation.
 .
 This package contains HTML documentation and example scripts.
Homepage: http://mathema.tician.de/software/pycuda
Section: contrib/doc
Priority: optional
Filename: pool/contrib/p/pycuda/python-pycuda-doc_2011.1.3+git20110814-1_all.deb
Size: 132462
MD5sum: df13be2cfff58f6b86f44dcf5775bd03
SHA1: 7bcc4607ac690dd715cb40e2474e2236ef61697e
SHA256: 4ff173d1178bb9af18a3d79c8f9cbc3d8c6fce3e0d812d4ae0302996777caf89

Package: python-pygpu
Source: pygpu
Version: 0.2.0a-629-4
Installed-Size: 476
Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Architecture: all
Provides: python2.6-pygpu, python2.7-pygpu
Depends: python2.6 | python2.7, python (>= 2.6.6-7~), python (<< 2.8), python-numpy, python-pyglew, python-pygame, python-imaging, python-cg
Description: embedded language for programming GPU using Python
 PyGPU is a compiler that lets you write image processing programs in
 Python that execute on the graphics processing unit (GPU) present in
 modern graphics cards. This enables image processing algorithms to
 take advantage of the performance of the GPU. In some applications,
 performance increases approach an order of magnitude, compared to CPUs.
Homepage: http://www.cs.lth.se/home/Calle_Lejdfors/pygpu/
Tag: devel::lang:python, devel::library, hardware::video, implemented-in::python, interface::commandline, role::devel-lib, role::program, works-with::image
Section: contrib/python
Priority: optional
Filename: pool/contrib/p/pygpu/python-pygpu_0.2.0a-629-4_all.deb
Size: 206186
MD5sum: 85e419778dabc0c9804c191326a7a9f0
SHA1: f6640b8dd92688fac19a3a5e3a0dfa918f8c9acb
SHA256: 0339b8361f7eebef5134d6ea870d76d3cc95472a49f15247a93183005c79ec2a

Package: python-pyopencl-doc
Source: pyopencl
Version: 2011.2-1
Installed-Size: 673
Maintainer: Tomasz Rybak <bogomips@post.pl>
Architecture: all
Depends: libjs-sphinxdoc (>= 1.0)
Recommends: python-pyopencl
Description: module to access OpenCL parallel computation API (documentation)
 PyOpenCL lets you access the OpenCL parallel computation API from
 Python. Here's what sets PyOpenCL apart:
  * Object cleanup tied to lifetime of objects. This idiom, often called
    RAII in C++, makes it much easier to write correct, leak- and
    crash-free code.
  * Completeness. PyOpenCL puts the full power of OpenCL’s API at your
    disposal, if you wish.
  * Convenience. While PyOpenCL's primary focus is to make all of OpenCL
    accessible, it tries hard to make your life less complicated as it
    does so--without taking any shortcuts.
  * Automatic Error Checking. All OpenCL errors are automatically
    translated into Python exceptions.
  * Speed. PyOpenCL’s base layer is written in C++, so all the niceties
    above are virtually free.
  * Helpful, complete documentation and a wiki.
  * Liberal licensing (MIT).
 .
 This package contains HTML documentation and example scripts.
Homepage: http://mathema.tician.de/software/pyopencl
Section: contrib/doc
Priority: optional
Filename: pool/contrib/p/pyopencl/python-pyopencl-doc_2011.2-1_all.deb
Size: 117948
MD5sum: a247b4eef80e00ab6ab2de24e54b6467
SHA1: 6f988c687af1bbfea855986505d8bed15b2dc233
SHA256: df4412055b11a47c167055ec0d838a8b52abbb62df15d3bf289439aee308baa4

Package: python-ldap-doc
Version: 2.3-2.1
Installed-Size: 500
Maintainer: Matej Vela <vela@debian.org>
Architecture: all
Description: Documentation for the Python LDAP interface module
 This module provides a Python interface to the OpenLDAP client library
 (LDAP is the Lightweight Directory Access Protocol).
 .
 This package contains the HTML documentation for the module.
Homepage: http://python-ldap.sourceforge.net/
Tag: devel::doc, devel::lang:python, made-of::html, role::documentation
Section: contrib/doc
Priority: optional
Filename: pool/contrib/p/python-ldap-doc/python-ldap-doc_2.3-2.1_all.deb
Size: 43616
MD5sum: 2bbcf676cbccdbbdf62e724214684da2
SHA1: 8433fe0a2f27c6dc70919b48fb68c6aa70b70948
SHA256: fec831ba4519f66596d56627cba6efe42993d9cca77292b34cfd4f134691e204

Package: python-pynast
Version: 1.1-2
Installed-Size: 356
Maintainer: Debian Med Packaging Team <debian-med-packaging@lists.alioth.debian.org>
Architecture: all
Depends: python2.6 | python2.7, python (>= 2.6.6-7~), python (<< 2.8)
Description: alignment of short DNA sequences
 The package provices a reimplementation of the Nearest Alignment
 Space Termination tool in python. It was prepared for next generation
 sequencers.
 .
 Given a set of sequences and a template alignment, PyNAST will align the
 input sequences against the template alignment, and return a multiple
 sequence alignment which contains the same number of positions (or
 columns) as the template alignment. This facilitates the analysis of new
 sequences in the context of existing alignments, and additional data
 derived from existing alignments such as phylogenetic trees. Because
 any protein or nucleic acid sequences and template alignments can be
 provided, PyNAST is not limited to the analysis of 16s rDNA sequences.
 .
 Since version 1.1, PyNAST no longer exactly matches the output
 of the origianl NAST program. Instead it focuses on getting better
 alignments. Users who wish to exactly match the results of NAST should
 download PyNAST 1.0.
 .
 PyNAST: a flexible tool for aligning sequences to a template
 alignment. J. Gregory Caporaso, Kyle Bittinger, Frederic D. Bushman,
 Todd Z. DeSantis, Gary L. Andersen, and Rob Knight. January 15, 2010,
 DOI 10.1093/bioinformatics/btp636. Bioinformatics 26: 266-267.
Homepage: http://pynast.sourceforge.net/
Section: contrib/python
Priority: extra
Filename: pool/contrib/p/python-pynast/python-pynast_1.1-2_all.deb
Size: 56992
MD5sum: 317a79258edd869e79f4b5503692cb31
SHA1: 9a528a27bf3ad81c896fc5ceaef77d800b2e60e0
SHA256: 382cb256470d730cc5feed3943b5ff8287af60a6af4de71df904aa2408865be8

Package: qmhandle
Version: 1.3.2-1
Installed-Size: 88
Maintainer: Marcela Tiznado <mlt@debian.org>
Architecture: all
Depends: perl
Description: tool to manage the qmail message queue
 qmHandle is a tool which can be used to manage the qmail message queue.
 It has more features than qmail-qread and qmail-qstat.
Tag: qa::low-popcon
Section: contrib/mail
Priority: optional
Filename: pool/contrib/q/qmhandle/qmhandle_1.3.2-1_all.deb
Size: 19454
MD5sum: e4a2e9a4ccc1f7e25761bcc3dc9741d9
SHA1: 8255937688f2e69e2fe08939a2c342a692f1e7ab
SHA256: 25d6d93b1225c8901af121a82d695c29083c61e6c4fee54194aa9d3a20c0cbad

Package: quake
Version: 2
Installed-Size: 179
Maintainer: David Banks <amoebae@gmail.com>
Architecture: all
Depends: quakespasm | quake-engine, quake-registered | quake-shareware | game-data-packager
Recommends: x11-utils | zenity | kdebase-bin
Suggests: quake-armagon (>= 29), quake-dissolution (>= 29)
Description: classic first person shooter
 This package contains a launcher script and menu entry to play
 Quake 1 with any suitable engine.
 .
 To make this package useful, you will need to create and install the
 non-distributable quake-registered or quake-shareware package, by using the
 game-data-packager package.
 .
 Creating quake-registered requires data files from a Quake installation or
 CD-ROM.
 .
 Creating quake-shareware requires the shareware version of Quake.
Section: contrib/games
Priority: optional
Filename: pool/contrib/q/quake/quake_2_all.deb
Size: 41664
MD5sum: 065b698da60f3951d52765b3bfc80ed0
SHA1: af8c4cacc1b9468543d5b7cde2af8b0a3133f142
SHA256: f8e1fb1f63212c59e2830c2fa67c7ac6be53a3fb94093bf4aab0adcba61594f7

Package: quake-server
Source: quake
Version: 2
Installed-Size: 76
Maintainer: David Banks <amoebae@gmail.com>
Architecture: all
Depends: adduser, quakespasm | quake-engine-server, quake-registered | quake-shareware | game-data-packager
Description: classic first person shooter - server and init script
 This package contains a launcher script and init script to run a
 Quake 1 server automatically, with any suitable engine.
 .
 To make this package useful, you will need to create and install the
 non-distributable quake-registered or quake-shareware package, by using the
 game-data-packager package.
Section: contrib/games
Priority: optional
Filename: pool/contrib/q/quake/quake-server_2_all.deb
Size: 7580
MD5sum: dd391098e426fcd161c2a2a7d9ac39f4
SHA1: 346e5a6d0789bd5d37a67d88043130275e30d36e
SHA256: b790d22e3424d29ab560f901e024b61a10b3fd5c28021437c508392b7dbe6e92

Package: quake3
Version: 1.3
Installed-Size: 284
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Depends: ioquake3, quake3-data | game-data-packager (>= 23)
Recommends: x11-utils | zenity | kdebase-bin
Description: Quake III Arena menu entry and launcher scripts
 This package contains a launcher script and menu entry to play
 Quake III Arena with the ioQuake3 engine.
 .
 To make this package useful, you will need to create and install the
 non-distributable quake3-data package, by using the game-data-packager
 package. This requires pak0.pk3 from a Quake III installation or CD-ROM.
Homepage: http://www.ioquake3.org/
Section: contrib/games
Priority: optional
Filename: pool/contrib/q/quake3/quake3_1.3_all.deb
Size: 54248
MD5sum: 9f8dfde8de866068553de1dd1586bc4f
SHA1: 6e88454f01add4553ccd2697f51e31843892aa64
SHA256: b2e1a60f1fad0da2e278d5bdc6c137eb38ce50f3d6337d7f2e891bd09ffde5c1

Package: quake3-server
Source: quake3
Version: 1.3
Installed-Size: 128
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Depends: adduser, ioquake3-server, quake3-data | game-data-packager (>= 23)
Description: Quake III Arena dedicated server launcher scripts
 This package contains a launcher script to run a Quake III Arena dedicated
 server with the ioQuake3 engine.
 .
 To make this package useful, you will need to create and install the
 non-distributable quake3-data package, by using the game-data-packager
 package. This requires pak0.pk3 from a Quake III installation or CD-ROM.
Homepage: http://www.ioquake3.org/
Section: contrib/games
Priority: optional
Filename: pool/contrib/q/quake3/quake3-server_1.3_all.deb
Size: 9346
MD5sum: 73597a3816c89313816856ed1de69673
SHA1: 0c7a8218fc4fdebed6b4956714add7b26ee000ec
SHA256: e69147fb51b976dbae6f8d6374f101fe869eae6b3837b09f2ba83f751ec888c9

Package: raccoon
Version: 1.0-1
Installed-Size: 284
Maintainer: Steffen Moeller <moeller@debian.org>
Architecture: all
Depends: python, autodocktools
Suggests: autodock, autodock-vina, torque
Description: preparation of in silico drug screening projects
 The field of computational biology is all about modeling
 physiochemical entities. Structural biology is about how
 those entities look in 3D and behave. And we have a drug
 when we can change that behaviour in a way that we want it
 to be changed - and only that behaviour.
 .
 Some good part of the characterisation of promising
 drug-like compounds for their interaction with a larger protein
 can be done on computers. This package helps with getting
 collections of small ligands prepared to be fitted against
 a particular protein of known structure. That docking itself
 is then to be performed by autodock or autodock-vina.
 .
 Raccoon may not find the drug, but it may well find a
 lead to it. To have this package with Debian shall help
 smaller biochemistry labs and grants an opportunity for the
 general public to educate itself and/or actively join in to
 help the world .... just a bit.
Homepage: http://autodock.scripps.edu/resources/raccoon
Section: contrib/science
Priority: extra
Filename: pool/contrib/r/raccoon/raccoon_1.0-1_all.deb
Size: 62366
MD5sum: f85a52e3cb8de9938639c4c46c9801bf
SHA1: 4beb7f8ff5d1d9711cb1c651557fefbb98777511
SHA256: 63535293d6fc2825927cbcf4349a0c5985e1bdfed49b09aa21de3db7652e2a27

Package: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 2605
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Depends: python (>= 2.6.6-7~), python-cheetah (>= 2.0.1), python-configobj, python-feedparser, sabnzbdplus-theme-plush (= 0.6.10-1)
Recommends: python-yenc (>= 0.3), python-openssl (>= 0.6), unzip, par2 (>= 0.4), unrar (>= 3.8.0) | rar (>= 3.8.0), sabnzbdplus-theme-classic, sabnzbdplus-theme-smpl
Suggests: sabnzbdplus-theme-mobile, python-dbus
Description: web-based binary newsgrabber with nzb support
 SABnzbd+ is a web-based binary newsgrabber written in Python, with support for
 the popular nzb file format. It greatly simplifies the process of downloading
 from usenet, thanks to a friendly web-based, fully customizable user interface
 and advanced built-in post-processing options including the ability to
 automatically verify, repair, extract and clean up downloaded posts.
 .
 Multiple servers are supported, as well as secure (ssl) connections, ipv6,
 scheduling, pausing and resuming downloads, queue manipulation, rss feeds,
 newzbin and nzbmatrix integration, automatic sorting, a download history,
 email notifications, and custom post-processing scripts. An extensive API
 allows third party applications to interact with the program.
 .
 The program is a fork of the original SABnzbd code, which is no longer actively
 developed.
Homepage: http://sabnzbd.org
Tag: implemented-in::python, role::program
Section: contrib/net
Priority: optional
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus_0.6.10-1_all.deb
Size: 944852
MD5sum: c0d32bf638e18455365bb382899bd6fe
SHA1: 3ad07c04168aa5f08740a622c434e7b93f5ac160
SHA256: bda2734ea61aa9c3d44fe361e339475a2787b33b9fd95abb2d068b5c498fe1c1

Package: sabnzbdplus-theme-classic
Source: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 299
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Depends: sabnzbdplus (= 0.6.10-1)
Enhances: sabnzbdplus
Description: classic interface templates for the SABnzbd+ binary newsgrabber
 Classic is a set of interface templates for the SABnzbd+ binary newsgrabber,
 formerly known as the "Default" templates. While fully functional, its
 design is basic and focused on compatibility.
 .
 This package contains the Classic interface templates, as distributed with
 the SABnzbd+ program releases.
Homepage: http://sabnzbd.org
Section: contrib/net
Priority: optional
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus-theme-classic_0.6.10-1_all.deb
Size: 85822
MD5sum: 0ffdf03529787e5ff9559ab29e209183
SHA1: 649c6f42187a56434dc297a6ef5940a994d28287
SHA256: 01156bb9101438efb0569f500eb3b304330d00e87a972189ea526b358faafe9f

Package: sabnzbdplus-theme-iphone
Source: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 109
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Depends: sabnzbdplus-theme-mobile
Description: transitional package for migration to sabnzbdplus-theme-mobile
 Transitional package for users of the former iphone interface templates for
 the 0.4.x series of the SABnzbd+ binary newsgrabber to its successor, Mobile.
 .
 This dummy package may be safely removed after upgrading.
Homepage: http://sabnzbd.org
Tag: qa::low-popcon, role::app-data
Section: contrib/oldlibs
Priority: extra
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus-theme-iphone_0.6.10-1_all.deb
Size: 37494
MD5sum: 3b80da4a0987a1fa352c5673f7c1872c
SHA1: d3e4dd3479228a2ab762192f0231ca092f47d723
SHA256: e46719a92ad7e35b2f6f7337999bf7beb717254e9a86171944f4c59ef127b15a

Package: sabnzbdplus-theme-mobile
Source: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 333
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Depends: sabnzbdplus (= 0.6.10-1)
Enhances: sabnzbdplus
Description: mobile interface templates for the SABnzbd+ binary newsgrabber
 Mobile is a set of interface templates for the SABnzbd+ binary newsgrabber,
 specifically designed for use with mobile devices.
 .
 This package contains the Mobile interface templates, as distributed with
 the SABnzbd+ program releases.
Homepage: http://sabnzbd.org
Section: contrib/net
Priority: optional
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus-theme-mobile_0.6.10-1_all.deb
Size: 100516
MD5sum: bc97e19d07a7b9974ea57b850942191c
SHA1: eb3612e648332e917e5600403adc296c7ad13def
SHA256: 72ff6920ff933a2a5a87cae4b325a9a942826b67774320fe975692ce8b7995d4

Package: sabnzbdplus-theme-plush
Source: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 735
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Recommends: sabnzbdplus
Description: plush interface templates for the SABnzbd+ binary newsgrabber
 Plush is a set of interface templates for the SABnzbd+ binary newsgrabber,
 providing access to a full set of features, even including a built-in IRC
 client. To this end, extensive use is made of ajax technology, with various
 graphical enhancements and artwork providing the finishing touch.
 .
 This package contains the Plush interface templates, as distributed with
 the SABnzbd+ program releases.
Homepage: http://sabnzbd.org
Tag: qa::low-popcon, role::app-data
Section: contrib/net
Priority: optional
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus-theme-plush_0.6.10-1_all.deb
Size: 233116
MD5sum: f39ca243b307813fd320161fb8275dc5
SHA1: dc8e0a1bd0072ff7a10712e441303728f2361d49
SHA256: 660e60dc51973038af5fd492731e86f9d771c2a8bee026713b4f0b43f6b4c192

Package: sabnzbdplus-theme-smpl
Source: sabnzbdplus
Version: 0.6.10-1
Installed-Size: 412
Maintainer: JCF Ploemen (jcfp) <linux@jp.pp.ru>
Architecture: all
Depends: libjs-mochikit (>= 1.4), libjs-excanvas, sabnzbdplus (= 0.6.10-1)
Enhances: sabnzbdplus
Description: smpl interface templates for the SABnzbd+ binary newsgrabber
 Smpl is a set of interface templates for the SABnzbd+ binary newsgrabber,
 featuring a simple, clean design, automatic updating of queue, history, and
 download speed at the refresh rate of your choice, a download graph,
 re-designed config look, AJAX form submitting, and dual Queue and history
 views.
 .
 This package contains the smpl interface templates, as distributed with
 the SABnzbd+ program releases.
Homepage: http://sabnzbd.org
Tag: qa::low-popcon, role::app-data
Section: contrib/net
Priority: optional
Filename: pool/contrib/s/sabnzbdplus/sabnzbdplus-theme-smpl_0.6.10-1_all.deb
Size: 111458
MD5sum: 919781b9644dda35f438f2877cf9002a
SHA1: c1900d81d29e8bbf06eb6ebc0a34d8ed6984ae13
SHA256: 46e9437ef835a6694d924a98258d8d651259b49e352e9894fadfdc06ba7dfcbb

Package: sapgui-package
Version: 0.0.10
Installed-Size: 72
Maintainer: Guido Günther <agx@sigxcpu.org>
Architecture: all
Depends: cdbs, fakeroot, dpkg-dev, openjdk-6-jre | java5-runtime, python, python-support (>= 0.90.0)
Description: utility to build SAP GUI related Debian packages
 This package provides the capability to create a Debian package for the
 Platinum Java SAP GUI from the provided JAR by just running
 'make-sgpkg <filename>'.
Homepage: https://honk.sigxcpu.org/piki/projects/sapgui-package/
Tag: qa::low-popcon
Section: contrib/misc
Priority: extra
Filename: pool/contrib/s/sapgui-package/sapgui-package_0.0.10_all.deb
Size: 7060
MD5sum: f6f4c7ada3d0b8f57894ca469c535f51
SHA1: 34ebe59f6a76dfe0d57b7cfd99e0f7c8f2ba83f3
SHA256: 56438d882810607449205a459e0041a8ace2be18b301bc81ede0e623386b2969

Package: sauerbraten-wake6
Version: 1.0-1
Installed-Size: 404
Maintainer: Gürkan Sengün <gurkan@linuks.mine.nu>
Architecture: all
Depends: sauerbraten
Description: Small but dodgy deathmatch/instagib map for the Sauerbraten game
 This is a free map for the 3d game Sauerbraten. Due to the basic textures it
 looks like cellshading which is pretty amazing.
Homepage: http://wakeup.rundumbonn.de/wscm/mapping/wake6.html
Tag: game::arcade, game::fps, interface::3d, role::app-data, use::gameplaying
Section: contrib/games
Priority: optional
Filename: pool/contrib/s/sauerbraten-wake6/sauerbraten-wake6_1.0-1_all.deb
Size: 268560
MD5sum: 381ad9c55ffa81d0a23a9df2cda4521d
SHA1: 20e94755a5b5088599d30b3a66dece5e1d56fbca
SHA256: b7785a835fd704a0cd1e66b63af79e650b5588ba6a3ed579c8f8f8d6798b421e

Package: sdic
Version: 2.1.3-19
Installed-Size: 192
Maintainer: Taku YASUI <tach@debian.org>
Architecture: all
Depends: dpkg (>= 1.15.4) | install-info, emacs | emacsen
Suggests: sdic-gene95, sdic-edict, sdic-eijiro, bsdmainutils
Description: Emacs interface for Japanese dictionaries
 This package provides an Emacs-Lisp viewer for English-Japanese
 and Japanese-English dictionaries.
Tag: works-with::dictionary
Section: contrib/text
Priority: optional
Filename: pool/contrib/s/sdic/sdic_2.1.3-19_all.deb
Size: 48808
MD5sum: 423f65b204ac656521cf05c0f6a2cdf4
SHA1: 45a20fa7ba985c07b7fb31a770e5f68606e29346
SHA256: 6259d2c4525ca1d098c573c55f255bee8ac4a946a40afd71f3cb2a8ef61dd3ee

Package: sdic-edict
Source: sdic
Version: 2.1.3-19
Installed-Size: 72
Maintainer: Taku YASUI <tach@debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, perl, edict
Recommends: sdic, sufary
Description: installer for EDICT dictionaries for sdic
 This package installs the EDICT Japanese-English
 dictionaries for use with sdic.
 .
 Although this package can install an English-Japanese
 dictionary derived from the EDICT Japanese-English dictionary,
 it is recommended to use the English-Japanese dictionary
 installed through sdic-gene95.
Tag: role::app-data
Section: contrib/text
Priority: optional
Filename: pool/contrib/s/sdic/sdic-edict_2.1.3-19_all.deb
Size: 14672
MD5sum: 9da018fc0d0100b478ce746821abab52
SHA1: 86e32e92c17c5eda195df1c200a94e21a9b0312f
SHA256: 9baa64b20f9723d2e9c49797ba713560635ba437471f0598959ffa9aa364cabb

Package: sdic-eijiro
Source: sdic
Version: 2.1.3-19
Installed-Size: 60
Maintainer: Taku YASUI <tach@debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, perl, nkf
Recommends: sdic, sufary
Description: installer for EIJIRO dictionaries for sdic
 This package installs the EIJIRO Japanese-English and
 English-Japanese dictionaries for use with sdic.
 .
 EIJIRO is available from the Electronic Dictionary Project, as
 detailed (in Japanese) at http://shop.alc.co.jp/cnt/eijiro/. The
 dictionary data can be obtained either by buying the book (ISBN
 4-7574-0838-2) or by downloading it from http://www.eijiro.jp/ and
 buying a key.
Tag: qa::low-popcon
Section: contrib/text
Priority: optional
Filename: pool/contrib/s/sdic/sdic-eijiro_2.1.3-19_all.deb
Size: 12228
MD5sum: 350354e74f76ff0cd0280e7918bd62c3
SHA1: e02dd09715bbf9f6af7c7c7cb72348b4ccb80c97
SHA256: 3c213bdff86f736507be5d53d52fd533ceb2fab980f6159018929aa9e863ef11

Package: sdic-gene95
Source: sdic
Version: 2.1.3-19
Installed-Size: 80
Maintainer: Taku YASUI <tach@debian.org>
Architecture: all
Depends: debconf (>= 0.5) | debconf-2.0, perl, wget, nkf, netcat-traditional | netcat
Recommends: sdic, sufary
Suggests: bzip2, kakasi
Description: installer for GENE95 dictionaries for sdic
 This package installs the GENE95 English-Japanese
 dictionary for use with sdic.
 .
 Although this package can install a Japanese-English
 dictionary derived from the GENE95 English-Japanese dictionary,
 it is recommended to use the Japanese-English dictionary
 installed through sdic-edict.
 .
 Before installing this package, you need a copy of gene95.lzh,
 gene95.tar.gz, or gene95.tar.bz2, available from:
  http://namazu.org/~tsuchiya/sdic/index.html
Tag: works-with::dictionary
Section: contrib/text
Priority: optional
Filename: pool/contrib/s/sdic/sdic-gene95_2.1.3-19_all.deb
Size: 18802
MD5sum: 02f110b5cb31c61fdca12e4626cb6b19
SHA1: af135eb677548ad8a905d18274d2393a6bf4c420
SHA256: b81dec7aca8fcbdef3f4b8d167eb801f6d1b8736fa8ed1e34767da0876270480

Package: series60-remote
Version: 0.4.0+dfsg.1-1
Installed-Size: 11900
Maintainer: Michal Čihař <nijel@debian.org>
Architecture: all
Depends: python (>= 2.5), python-support (>= 0.90.0), python-qt4, python-qt4-sql, python-bluez, libqt4-sql-sqlite | libqt4-sql-mysql
Recommends: python-obexftp, python-matplotlib
Description: S60 mobile phone management application
 Series60-Remote is an application to manage your mobile phone. You can
 send and receive SMS messages directly on your computer. It also
 provides a complex contact and file management.
Homepage: http://series60-remote.sourceforge.net/
Python-Version: 2.5, 2.6
Section: contrib/comm
Priority: extra
Filename: pool/contrib/s/series60-remote/series60-remote_0.4.0+dfsg.1-1_all.deb
Size: 2550932
MD5sum: a762906330d4e38c9f620b56c3c2713e
SHA1: 13fc810761dbf725742f49935f8e3f9fad66e5fc
SHA256: e3b715703f12838f715aa8cb4ae51f6e1f1cc3110d6778721c9552b16c214a88

Package: sqldeveloper-package
Version: 0.2.3+nmu1
Installed-Size: 88
Maintainer: Lazarus Long <lazarus.long@bigfoot.com>
Architecture: all
Depends: bzip2, devscripts, fakeroot, file, unzip, tofrodos, imagemagick
Description: Oracle SQL Developer Debian package builder
 This utility makes it possible to build a Debian package of Oracle SQL
 Developer. The Oracle SQL Developer program is governed by the copyright
 holder (Oracle USA, Inc.), so you may be limited as to what you can do with
 the resulting package (i.e. no redistribution, etc). This utility will simply
 help you create the Debian package, it is your responsibility to use the
 resulting package acordingly with the OTN license, a copy of which is included
 in the created package, that you must agree on when downloading the source.
 .
 This utility will require you to download the architecture independent archive
 from <http://otn.oracle.com/software/products/sql/>, identified as "Oracle SQL
 Developer for other platforms", "Oracle SQL Developer for Multiple Platforms"
 or "Oracle SQL Developer for Linux and Unix" (depending on which version you
 are building), to create the Debian package from.
Section: contrib/misc
Priority: optional
Filename: pool/contrib/s/sqldeveloper-package/sqldeveloper-package_0.2.3+nmu1_all.deb
Size: 17516
MD5sum: aca603d50f518a30b278fe5be326ef8b
SHA1: 3258958624c661545e2b143eb7f40643975debe0
SHA256: c5c8dbcb668ebd81859a9d41e65319a0df36e0d1c4629dd7ca0fc2b26097ae24

Package: sugar-etoys-activity
Version: 115-1
Installed-Size: 220
Maintainer: Debian OLPC <debian-olpc-devel@lists.alioth.debian.org>
Architecture: all
Depends: python, python-central (>= 0.6.11), python-sugar-0.88 | python-sugar, python-sugar-toolkit-0.88 | python-sugar-toolkit, python-hippocanvas, python-telepathy, python-gtk2, python-cjson, etoys
Recommends: sugar
Description: Sugar wrapper around the Squeak Etoys programming language
 Sugar is a graphical user interface aimed at children.
 .
 Originating as intregral part of the OLPC "XO" a.k.a. the $100 laptop,
 Sugar has since grown into a more widely usable low-ressource desktop
 environment for kids.
 .
 This package contains the Etoys activity.
 .
 Etoys is an educational tool for teaching children ideas in compelling
 ways. It features a media-rich authoring environment and visual
 programming system.
Homepage: http://wiki.laptop.org/go/Etoys
Python-Version: all
Section: contrib/x11
Priority: optional
Filename: pool/contrib/s/sugar-etoys-activity/sugar-etoys-activity_115-1_all.deb
Size: 71382
MD5sum: 7e33df0920e42d3bbeb6e223b3edada2
SHA1: 7be278617605695c2da0ae66c9ed49cda9b0425c
SHA256: cac11591f51af1eb440f4dd80f27894c0705d94b1c3d34c1b7500a32698804e5

Package: susv2
Version: 1.1
Installed-Size: 48
Maintainer: Jeff Bailey <jbailey@raspberryginger.com>
Architecture: all
Depends: wget, bzip2
Description: Fetch and install SUSv2 documentation
 The Single Unix Specifications are not permitted to be generally
 redistributed, so this is an installer that fetches them and installs
 them in a Debian appropriate way.
Section: contrib/doc
Priority: extra
Filename: pool/contrib/s/susv2/susv2_1.1_all.deb
Size: 2278
MD5sum: 642970f69b890f9f999976e0590d7e2e
SHA1: abceba6c52cb615a466641f7d0e68c5be1e0abe4
SHA256: 4618d00ea779aadafe6a1a78cae980b949a4e74bb876619a482385d95d0e439e

Package: susv3
Version: 6.1
Installed-Size: 48
Maintainer: Jeff Bailey <jbailey@raspberryginger.com>
Architecture: all
Depends: wget, bzip2
Description: Fetch and install SUSv3 documentation
 The Single Unix Specifications are not permitted to be generally
 redistributed, so this is an installer that fetches them and installs
 them in a Debian appropriate way.
Section: contrib/doc
Priority: extra
Filename: pool/contrib/s/susv3/susv3_6.1_all.deb
Size: 2282
MD5sum: 3b6fe02e60aaadc0e6a643226baa7a5d
SHA1: 1b5b503ce8569f297943674ed6cd60a011159ff9
SHA256: 422dfe21b616e1d7ab224695e1b45d6ccec14561eb1a469649f1717e59ee5931

Package: tightvnc-java
Version: 1.2.7-8
Installed-Size: 204
Maintainer: Ola Lundqvist <opal@debian.org>
Architecture: all
Provides: vnc-viewer
Suggests: tightvncserver
Description: TightVNC java applet and command line program
 VNC stands for Virtual Network Computing. It is, in essence, a remote
 display system which allows you to view a computing `desktop' environment
 not only on the machine where it is running, but from anywhere on the
 Internet and from a wide variety of machine architectures.
 .
 This is the vnc java applet files that the tightvncserver
 can distribute to the client.
Tag: network::client, role::program, use::login
Section: contrib/java
Priority: optional
Filename: pool/contrib/t/tightvnc-java/tightvnc-java_1.2.7-8_all.deb
Size: 104042
MD5sum: 8bd93c31b42f0d2c6fbfcfbcee1b4e7f
SHA1: af6c3ffb662a153c54230574977ae828f52914bb
SHA256: 54a087c4d9d50608cee9183c7ccbe6662c98777a9caa81f5590309f19b0cfd5e

Package: tremulous-doc
Source: tremulous
Version: 1.1.0-5
Installed-Size: 716
Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
Architecture: all
Recommends: tremulous
Suggests: tremulous-server
Description: Tremulous documentation
 This package contains the PDF manual for the Tremulous client and server.
 .
 Tremulous is a free, open source game that blends a team based First Person
 Shooter (FPS) game with elements of a Real Time Strategy (RTS) game. Players
 can choose from 2 unique races, aliens and humans. Players on both teams are
 able to build working structures in-game like a Real Time Strategy game.
 These structures provide many functions, the most important being spawning.
 The designated builders must ensure there are spawn structures or other players
 will not be able to rejoin the game after death. Other structures provide
 automated base defense (to some degree), healing functions and much more...
 .
 Player advancement is different depending on which team you are on. As a
 human, players are rewarded with credits for each alien kill. These credits
 may be used to purchase new weapons and upgrades from the "Armoury". The alien
 team advances quite differently. Upon killing a human foe, the alien is able
 to evolve into a new class. The more kills gained the more powerful the classes
 available.
 .
 The overall objective behind Tremulous is to eliminate the opposing team. This
 is achieved by not only killing the opposing players but also removing their
 ability to respawn by destroying their spawn structures.
Tag: made-of::pdf, role::documentation
Section: contrib/doc
Priority: optional
Filename: pool/contrib/t/tremulous/tremulous-doc_1.1.0-5_all.deb
Size: 644974
MD5sum: 85cb7b1c82c784798b36a6730ab2afd0
SHA1: 92ecdedf6dd4a7965329e95ad0159cf655338b39
SHA256: 0e2efcb2bd915232bd87e919e18e8252b3e575c0c596acfc157bb49a3ca4e7fe

Package: uqm-russian
Version: 1.0.2-5
Installed-Size: 1496
Maintainer: Dmitry E. Oboukhov <unera@debian.org>
Architecture: all
Depends: uqm (>= 0.6.2.dfsg-5)
Description: Russian addon for 'The Ur-Quan Masters' game
 You return to Earth with a vessel built from technology discovered from an
 ancient race called the Precursors only to find it enslaved. Gather allies
 from a wide variety of races, engage in space combat with various foes, and
 save the galaxy from the Ur-Quan!
 .
 The Ur-Quan Masters is derived from the classic game Star Control II.
 It includes both the adventure game described above and a fast-paced
 Super Melee.
 .
 This package provides Russian menus and dialogs for the game.
Homepage: http://uqm-rus.uvw.ru
Tag: culture::russian, role::app-data
Section: contrib/games
Priority: extra
Filename: pool/contrib/u/uqm-russian/uqm-russian_1.0.2-5_all.deb
Size: 1046348
MD5sum: 695a77c9af42d5b0aa3f8ecab1463d7c
SHA1: 5daaadcebf5afb377000fe592faff4a66e80d640
SHA256: 7c27d3b7d8a0c22df2caa7eeff66ce062fb7248c48915550298800a554fb2018

Package: libviennacl-dev
Source: viennacl
Version: 1.1.2-6
Installed-Size: 1144
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: all
Depends: opencl-headers, libopencl1
Suggests: libeigen2-dev, libboost-dev, libviennacl-doc
Description: Scientific computing library written in C++ based on OpenCL
 The Vienna Computing Library (ViennaCL) is a scientific computing library
 written in C++ and based on OpenCL. It allows simple, high-level access to the
 vast computing resources available on parallel architectures such as GPUs and
 is primarily focused on common linear algebra operations (BLAS levels 1, 2 and
 3) and the solution of large systems of equations by means of iterative
 methods with optional preconditioner.
 .
 ViennaCL is header-only with no binary library and projects using it only need
 to link against a conforming OpenCL implementation.
Homepage: http://viennacl.sourceforge.net
Section: contrib/libdevel
Priority: extra
Filename: pool/contrib/v/viennacl/libviennacl-dev_1.1.2-6_all.deb
Size: 110994
MD5sum: 4a34050d4aa55a08a6a2a89cc8ba2097
SHA1: 1fc57d6863c66c14070f5dc1db451c1e68f9e4b0
SHA256: fe3d2042a9dc94008596ddbdf741df4a605bab266297d0d9782727c00b064448

Package: libviennacl-doc
Source: viennacl
Version: 1.1.2-6
Installed-Size: 8964
Maintainer: Debian Science Maintainers <debian-science-maintainers@lists.alioth.debian.org>
Architecture: all
Suggests: libviennacl-dev
Description: ViennaCL API and user documentation
 The Vienna Computing Library (ViennaCL) is a scientific computing library
 written in C++ and based on OpenCL. It allows simple, high-level access to the
 vast computing resources available on parallel architectures such as GPUs and
 is primarily focused on common linear algebra operations (BLAS levels 1, 2 and
 3) and the solution of large systems of equations by means of iterative
 methods with optional preconditioner.
 .
 This package contains the Doxygen-generated source code and the user
 documentation.
Homepage: http://viennacl.sourceforge.net
Section: contrib/doc
Priority: extra
Filename: pool/contrib/v/viennacl/libviennacl-doc_1.1.2-6_all.deb
Size: 1212060
MD5sum: 0e57d2af3c4750412259c33a07766f59
SHA1: e7dc7b676b34d14ffb360b7c5a9dc68313fc4a36
SHA256: 1c01494857bc2d411317c034b17c69f3a7a29504bef39987db5e6dda66502ece

Package: vmware-manager
Version: 0.1.1-2
Installed-Size: 108
Maintainer: Alexander Zangerl <az@debian.org>
Architecture: all
Depends: perl (>= 5.10.0), libconfig-inifiles-perl, libnumber-format-perl, libterm-readkey-perl, libtext-glob-perl, libdata-dump-perl
Description: utility to manage VMware virtual machines
 This package provides vmm, a command-line tool for managing VMware
 virtual machines. This is primarily useful for larger installations
 where virtuals need to be migrated, cloned or otherwise modified
 from the command line.
 .
 vmm requires the non-free VMware Vsphere Perl SDK to be installed.
Homepage: https://github.com/hash-bang/VMM
Section: contrib/admin
Priority: optional
Filename: pool/contrib/v/vmware-manager/vmware-manager_0.1.1-2_all.deb
Size: 27020
MD5sum: 202aae3ec72be0aa42b7ce969a0a917f
SHA1: 590b7f15b358d7fc85ce96affaa814f8963dfb01
SHA256: 81356ce743ee0230ac53052ddaf9ac6983b299b148768f45569036387412b43c

Package: vnc-java
Version: 3.3.3r2-8
Installed-Size: 160
Maintainer: Ola Lundqvist <opal@debian.org>
Architecture: all
Provides: vnc-viewer
Suggests: vncserver
Conflicts: vncserver (<< 3.3.3r2-14)
Description: VNC java applet and command line program
 VNC stands for Virtual Network Computing. It is, in essence, a remote
 display system which allows you to view a computing `desktop' environment
 not only on the machine where it is running, but from anywhere on the
 Internet and from a wide variety of machine architectures.
 .
 This is the vnc java applet files that the vnc-server
 can distribute to the client.
 .
 It also includes the TightVNC patches from http://www.tightvnc.com/
Tag: devel::lang:java, role::plugin
Section: contrib/java
Priority: optional
Filename: pool/contrib/v/vnc-java/vnc-java_3.3.3r2-8_all.deb
Size: 65800
MD5sum: 65e25c1d1ddf2600d98672394cdf58cf
SHA1: 26b5e8359a4a84046abeb19d1e4bf153104f70f1
SHA256: e0807b9837c8d8e63a2c1b76e4aa18b1a6f2596b72260b52dac547e7b066e32e

Package: vusb-analyzer
Version: 1.1-3
Installed-Size: 292
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Depends: python, python-support (>= 0.90.0), python-gtk2
Recommends: python-gnome2, python-psyco
Description: tool for visualizing logs of USB packets
 The Virtual USB Analyzer is a tool for visualizing logs of USB packets, from
 hardware or software USB sniffer tools.
 .
 Currently, it supports two log formats (but it's designed to be easily
 extensible):
 .
  * Logged USB traffic from debug builds of VMware Fusion, Workstation, or
    Player.
  * XML logs from the Ellisys USB Explorer 200, a hardware USB 2.0 analyzer.
Homepage: http://vusb-analyzer.sourceforge.net/
Section: contrib/utils
Priority: optional
Filename: pool/contrib/v/vusb-analyzer/vusb-analyzer_1.1-3_all.deb
Size: 50772
MD5sum: 71a5f28993180a25e9ebc7f99c7a57a5
SHA1: fb1f814e8e1917e281f93c812930a376416405e8
SHA256: cc5cff2b66efd2a5b706dc71987af1e0dd87f008faa53a13f7a2c0631a1714fb

Package: winetricks
Version: 0.0+20110629-1
Installed-Size: 679
Maintainer: Jari Aalto <jari.aalto@cante.net>
Architecture: all
Depends: wget, cabextract, unzip, p7zip
Recommends: wine | wine-unstable, zenity | kdebase-bin, xdg-utils, sudo | gksu
Description: package manager for WINE to install software easily
 A POSIX shell script 'package manager' for WINE to install some
 Windows software easily. The list of downloadable applications is
 retrieved over the net. The list contains about 70 applications
 including 3dmark2001, corefonts, cygwin, directx9, dotnet35, droid,
 firefox, flash, ie8, mspaint, msxml6, python26, quicktime76, safari,
 spotify, utorrent, vb6run, vcrun2010, vlc and xvid.
 .
 To use GUI progress bar, install package "zenity". To read manuals,
 install package "xdg-utils". If you need to cache *.iso files with
 -k option, install packages "sudo" (or sudo GUI "gksu").
Homepage: http://code.google.com/p/winetricks
Section: contrib/otherosfs
Priority: optional
Filename: pool/contrib/w/winetricks/winetricks_0.0+20110629-1_all.deb
Size: 158708
MD5sum: a4750563dccf576ffa8a47541d7c83bd
SHA1: 48db656b4f53df4996e5ff145d0a699976386b83
SHA256: c79ae1b196bb8566f371132c0b29e8e37894242d5895683e82e5b35d3d528be9

Package: wnn7egg
Version: 1.02-8
Installed-Size: 680
Maintainer: ISHIKAWA Mutsumi <ishikawa@debian.org>
Architecture: all
Replaces: wnn7-elisp
Depends: emacs23 | emacs23-lucid | emacs23-nox | emacs-snapshot-gtk | emacs-snapshot | emacs-snapshot-nonx | xemacs21-mule | xemacs21-mule-canna-wnn | xemacs21-gnome-mule | xemacs21-gnome-mule-canna-wnn
Conflicts: wnn7-elisp
Description: Wnn-nana-tamago -- EGG Input Method with Wnn7 for Emacsen
 EGG for Wnn7, called `wnn-nana-tamago' is Japanese Input Method for
 Emacsen. It is based on Tamago ver.3 (v3.09) and incorporated the
 communication library part of Tamago Ver.4
 .
 This only can use with Jserver of Wnn7.
Tag: culture::japanese, suite::emacs, use::editing
Section: contrib/utils
Priority: extra
Filename: pool/contrib/w/wnn7egg/wnn7egg_1.02-8_all.deb
Size: 132736
MD5sum: da56c09ae540fecf695962e0a8dd2632
SHA1: 560b4bfe862bd2ac941e384a97e9bd389b92adcc
SHA256: 2ac9a48edd4ea81296fd28e89349fca5092c12af425978cf7f74acbb1ebd1329

Package: x-pgp-sig-el
Version: 1.3.5.1-4.1
Installed-Size: 236
Maintainer: Takuo KITAME <kitame@northeye.org>
Architecture: all
Depends: emacsen, pgp
Description: X-PGP-Sig mail and news header utility for Emacs
 X-PGP-Sig header utility for Emacs.
 It can insert/verify PGP signatures in the X-PGP-Sig: mail/news header.
 x-pgp-sig.el is for MH(mh-e, Mew and so on), Gnus, Semi-gnus, wl(Wanderlust)
 VM, cmail etc... (MUA on Emacs).
 .
 English documentation is not available, only Japanese.
Tag: suite::emacs, use::editing
Section: contrib/lisp
Priority: optional
Filename: pool/contrib/x/x-pgp-sig-el/x-pgp-sig-el_1.3.5.1-4.1_all.deb
Size: 57472
MD5sum: 1e8eabaab3cbe1c41c56266ed121b9ad
SHA1: 8c6b2d1f5c0a9f2bed18873cecd85b50ec8036d0
SHA256: a13063d8eee3edbd7aabe2632cbda0a4f66ce5ed9ab55ffbeabf97e99724453d

