biblatex-dw 2011/02/06 v1.3c
Copyright (c) 2008-2011 Dominik Waenhoven <domwass(at)web.de>

 Version history
 ---------------

v1.3c [2011/02/06]
This version of biblatex-dw needs biblatex 1.1a. Please note 
that you have to update biblatex as well if you would like 
to use biblatex-dw 1.3c!
 - BUGFIX: Under some circumstances, an error occurred 
   (command \cbx@tempa could not be found). This should be 
   fixed now.
 - BUGFIX: Some of the German translations were broken due 
   to a change of internal commands in biblatex. This is now 
   fixed.
 - The entry type @review is now supported. You can 
   specify a reviewed work via the xref field. See the 
   documentation for details. 
 - Some internal changes concerning \DeclareFieldFormat 
   directives.

v1.3b [2010/11/21]
This version of biblatex-dw was tested against biblatex 1.0, 
but it should also work with versions from biblatex 0.9d.
The following changes were made to biblatex-dw:
 - BUGFIX: Using pagetotal=false and citepages=separate, the 
   herename was printed as soon as the pagetotal field was 
   present (although the pagetotal field itself was not
   printed). This is now fixed, and the citepages option 
   pays attention to the pagetotal option.
 - In order to match as closely as possible to biblatex 
   itself, the \citenamepunct command was renamed to 
   \nametitledelim. For compatibility reasons with earlier 
   versions of biblatex-dw, the \citenamepunct was kept. 
   Thus, it does not matter if you redefine \nametitledelim 
   or \citenamepunct, the effect will be the same; but note 
   that the \citenamepunct may be dropped in later versions 
   of biblatex-dw. 
 - In full citations \nametitledelim is used instead of 
   \labelnamepunct.
 - Improvements regarding idem functionality in combination
   with xref=true.
 - Improved the documentation.

v1.3a [2010/09/21]
This version of biblatex-dw supports biblatex 0.9d. Please 
note that you have to update biblatex at least to version 
0.9b if you would like to use biblatex-dw 1.3a! You will 
also need to install the package logreq which is a new 
requirement since biblatex 0.9b. Users might also need to 
update their data due to some changes in biblatex 0.9a and 
biblatex 0.9b. Please follow the hints for users given in 
biblatexs RELEASE notes for both of these versions.
The following changes were made to biblatex-dw:
 - Option omitpages was renamed to citepages and 
   enhanced. As in the verbose standard styles, you can now 
   choose between permit, omit, suppress and 
   separate. Other as in the biblatex styles, the standard 
   for this option in biblatex-dw is separate.
 - Option herename dropped. The same functionality can now 
   be achieved by using citepages=separate. Note that the 
   bibliography string herename was also dropped, 
   thiscite is used instead.
 - New option shorthandinbib: if set to true, the 
   shorthand of each entry will be typeset in the 
   bibliography before each item. The shorthand will be set 
   in brackets, separated by a space. You can customize this 
   behaviour by adjusting the following commands:
     \DeclareFieldFormat{shorthandinbib}{\mkbibbrackets{#1}}
     \newcommand*{\shorthandinbibpunct}{\addspace}
   The default for shorthandinbib is false.
 - BUGFIX: The shorthandpunct could not be redefined by a 
   simple \renewcommand, but only as an argument of 
   \AtBeginDocument. This is now fixed, and a simple 
   \renewcommand is sufficient. 
 - BUGFIX: The shorthandpunct was also printed, when the 
   option shorthandwidth was not in use (this had only 
   effect, when the shorthandpunct was redefined). This is 
   now fixed.
 - BUGFIX: When using authortitle-dw with firstfull=true, 
   a \parencite had an erroneous space for the first 
   citation without a postnote. This is now fixed.
 - BUGFIX: The new editorial roles introduced in biblatex 
   0.9 were not fully supported. This is now fixed.
 - BUGFIX: The option firstfullname did not work with
   biblatexs option uniquename. This is now fixed.
 - BUGFIX: When using hyperref, some links to the 
   bibliography were broken. This should now be fixed. 
 - BUGFIX: In @inbook entries the punctuation after a book 
   author was not the \labelnamepunct. This is now fixed.

v1.3 [2010/03/11]

This version of biblatex-dw supports biblatex 0.9. Please 
note that you have to update biblatex as well if you would 
like to use biblatex-dw 1.3! Users might need to update 
their data due to some changes in biblatex, especially 
concerned with date specifications. Please follow the hints 
for users given in biblatexs RELEASE notes.

Further changes in this release:
 - The options isrn and issn were dropped. Their
   functionality can be achieved by the biblatex option 
   isbn.
 - BUGFIX: When using idembibformat=dash, the @inreference 
   entries had a wrong punctuation inside the title. This is 
   now fixed.
 - Option pseudoauthor changed: if set to true (and the 
   entry option pseudoauthor is used), the author of this 
   entry is printed. The new commands \bibleftpseudo and 
   \bibrightpseudo are used to enclose the author. These 
   commands are empty by default. If the global option 
   pseudoauthor is set to false, the author of entries 
   with the entry option pseudoauthor are not printed at 
   all. The default value for the global option is true 
   (i.e. the behaviour is the same regardless of the entry 
   option pseudoauthor).
 - New command \locationdatepunct for the punctuation 
   between location and year/date. The default is \addspace.
 - New command \locationpublisherpunct for the punctuation
   between location and publisher. The default is 
   \addcolon\space.
 - New command \publisherdatepunct for the punctuation 
   between publisher and year/date. The default is 
   \addcomma\space.
 
v1.2o [2010/02/14]
 - BUGFIX: When using the options xref=true and 
   useeditor=false, the editor was not printed in the 
   bibliography. This is now fixed. Also, some bugs 
   regarding the xref functionality in citations could be 
   fixed.
 - BUGFIX: The editors in @incollection, @inproceedings and 
   @inreference entries were printed using the name format 
   sortname (Lastname, Firstname) where it should have 
   been the name format byeditor (Firstname Lastname). 
   This is now fixed.   
 - New option omiteditor: If one uses useeditor=false 
   and omiteditor=true, the editor in citations will be 
   omitted. The same applies to the xref functionality in 
   the bibliography. With useeditor=true, this option has 
   no effect. The standard for this option is false.
 - The limitation regarding the combination of xref=true, 
   edbyidem=true and useeditor=false is no longer valid.
   That means, it is not necessary to have the editor in the 
   child entry as well in order to get an idem string.
 - Extended the documentation.

v1.2n [2010/01/24]
 - The option edbeforetitle was discarded. The same 
   functionality can be obtained by the option useeditor. 
   In this context, some bugs could be resolved. 
 - New option omitpages: if set to true, the page range 
   of @article, @inbook, @incollection or @inproceedings 
   entries will be suppressed in full citations. 
   The standard value is false.
 - Extended the documentation regarding the xref 
   functionality.

v1.2m [2010/01/18]
 - BUGFIX: Changed the default of \citerevsdnamedelim which 
   used to be a \slash. Now it is empty, because otherwise 
   it produced two slashes in some circumstances.
 - BUGFIX: In footnote-dw with xref=true, the reference to 
   the first entry did not work if the first citation of a 
   parent was cited via a child. This is now fixed. 
 - BUGFIX: In footnote-dw the punctuation of @collection 
   entries was wrong when using a prenote in conjunction 
   with useeditor=false or when there was no editor. This 
   is now fixed.
 - The biblatex option singletitle can now be used both 
   with authortitle-dw and footnote-dw. Using this option, a
   works title is only printed if there is not more than
   one work by the author or editor. 
 - New entry option pseudoauthor. If set to true, the 
   author is put in brackets. This is useful for e.g. 
   editions of works whose authors are not named, but are 
   known. See the documentation for details. The entry 
   option does only have effect if the global option 
   pseudoauthor is set to true. The default value is 
   false.
   
v1.2l [2009/10/19]
 - BUGFIX: With footnote-dw, the references to the first 
   citations did not work, when refsections were used. This 
   is now fixed.
 - BUGFIX: With xref=true, when no volume was present in an 
   @inreference entry as well as in its corresponding 
   @reference entry, the bibstring vol. was printed. This 
   is now fixed. 
 - New option shortjournal. If set to true, the field 
   shortjournal is used instead of journaltitle. This is
   useful for journal abbreviations. The default is false.
 - New option acronyms. If set to true, shorthands (and 
   with shortjournal=true also the abbreviated journal 
   titles) are set with the command \mkbibacro, but only if 
   the entry option acronym is set to true. The default 
   is false.
 - New option pageref (in footnote-dw only). If set to 
   true, it adds the page to the footnote number pointing 
   to the full citation if it is located on a different 
   page. This option is the same as in the standard styles 
   verbose-note and verbose-inote. The default is false.
 - In footnote-dw, the pointer to the earlier citation is 
   suppressed if a shorthand exists and the option citedas 
   is true. Note that you can override the global option 
   citedas by setting the entry option citedas.

v1.2k [2009/08/22]
 Adjustments to biblatex version 0.8e. Note that from this 
 version on biblatex 0.8e is required, so you have to update 
 biblatex as well if you would like to use biblatex-dw 1.2k!
   - Compound abbreviations (introduced in biblatex-dw 1.2i)
     are now separated by the new biblatex command 
     \addabthinspace; this affects only the German 
     localization in strings like hg. v.
   - The improved concatenation of roles is used. See 
     biblatexs release notes for details.
   - The new auxiliary macros for ordinals are used. See 
     biblatexs release notes for details.
 BUGFIXES
 - BUGFIX: The option ibidpage did not work with 
   footnote-dw. This is now fixed. 
 Changed Entry Types
 - @inreference
   Up to now, this entry type was an alias for 
   @incollection. From now on, this entry type can be used 
   for articles in encyclopedias or dictionaries. For 
   details on how @inreference entries differ from @
   incollection entries, please consult the documentation.
   The @reference type remains an alias for @collection.
 New Options
 - isrn and pagetotal
   These options can take the values true and false. 
   With these options you can decide whether you want to 
   have printed the corresponding fields or not. 
   The default for these options is false. 
 - edstringincitations
   If set to true, the editor and translator strings are 
   shown in the citations (not only in the full citations). 
   The default is true.
 - series=standard|afteryear
   If set to afteryear, the series is printed after the 
   year. This affects the entry types @book, @inbook, 
   @collection, @incollection, @proceedings, @inproceedings 
   and @manual.
 New Commands
 - seriespunct
   punctuation before the series (of a book etc.). This 
   punctuation is set inside the parentheses. You can set it 
   e.g. to =\addspace which is common in some fields. The 
   default is empty, i.e. the series is printed right after 
   the opening round bracket.
 - sernumstring
   punctuation between series (of a book etc.) and number. 
   The default is \addspace. You can easily redefine it, 
   e.g.:
     \renewcommand*{\sernumstring}{%
       \addcomma\space\bibstring{volume}\addspace}
   This would give (Name of Series, vol. N).
 - herenamepunct
   If the herename is used, the punctuation before the 
   herename is determined by herenamepunct. The default is 
   \addcomma\space.
 Localization Changes
 - In German localization, the strings withcommentator, 
   withannotator and withintroduction are shortened as 
   follows:
   -> withcommentator: komm. v.
   -> withannotator: erlut. v.
   -> withintroduction: eingel. v.
   The long versions stay the same as in standard biblatex. 

v1.2j [2009/08/16]
 - This is just a bugfix release. The only files changed are
   footnote-dw.cbx, CHANGES, README and LIESMICH.
 - BUGFIX: Since biblatex version 0.8e, footnote-dw gave an 
   error (Undefined control sequence: \blx@addperiod). This 
   is now fixed; thus, biblatex-dw (or rather footnote-dw) 
   should work with the biblatex versions 0.8e, 0.8f, 0.8g 
   and 0.8h, but it will not work with earlier versions.

v1.2i [2009/05/10]
 - BUGFIX: When using option usetranslator=true, the 
   translator string was not aware of the option 
   editorstring. This is now fixed.
 - Improved bibmacro journal+issuetitle which is now aware 
   of the option edbeforetitle.
 - The typeeditor field is now supported. It can take the 
   values editor and compiler. This field determines the 
   editor string after the name of the editor(s). The 
   abbreviated forms are ed. for editor and comp. for 
   compiler. In German, both strings are the same 
   (Herausgeber or Hrsg.).
 - In English, the idem string is now declined (idem, 
   eadem, idem in singular; eidem, eaedem, eadem in plural) 
   and no longer abbreviated, even if abbreviate=true is 
   used.
 - Improved the handling of origfields=true.
 - In German, the string reprint (Nachdruck) is now 
   abbreviated as Ndr., not as Nachdr.
 - Compound abbreviations are now separated by a thin space 
   rather than a normal one. At the moment, this affects 
   only the German localization in strings like hg. v.

v1.2h [2009/03/29]
 - BUGFIX: The idem functionality is now also aware of 
   page breaks. If the citation is the first on a page (or 
   double page in twoside mode), the idem is suppressed. 
   If you dont want this behaviour, you can set the option 
   pagetracker=false.

v1.2g [2009/03/20]
 - Option journalnumber replaces journumafteryear. The 
   option was enhanced and can now take the values 
   standard, afteryear and date. The value standard 
   is the same as the old journumafteryear=false, 
   afteryear is the same as the old journumafteryear=true. 
   The new value date assures that the date is printed, 
   even if the field issue is given (this is not the case in 
   the standard styles). Additionally, journalnumber=date 
   prints the number before the date, if the date (at least 
   year and month) is given, but it prints the number after 
   the year, if only the year is given (i.e. if the date is 
   not further specified). See the documentation for 
   details. The default is journalnumber=standard.
 - Improved german-dw.lbx.
 - Adjusted the documentation for screen reading. A printer 
   friendly version can still be compiled from the source.

v1.2f [2009/02/15]
 - Adjustments to biblatex version 0.8c. Note that from 
   this version on biblatex 0.8c is required, so you have to
   update biblatex as well if you would like to use 
   biblatex-dw 1.2f!
   -> The biblatex-dw option idem was replaced by the new
      biblatex option idemtracker. The standard setting is
      idemtracker=constrict. If you would like to switch 
      off the idem functionality, you can use 
      idemtracker=false. For more information on the 
      idemtracker option see the biblatex manual.
 - New options doi, eprint, isbn and issn which can 
   take the values true and false. With these options 
   you can decide whether you want to have printed the 
   corresponding fields or not. The default for these 
   options is false (as was the standard before). 
 - New option idemfont which can take the values 
   smallcaps, italic, bold and normal. The default 
   is none which means that the idem string is printed in 
   the font shape of namefont. 
 - New option ibidemfont which can take the values 
   smallcaps, italic and bold. The default is none 
   which means that the ibidem string is printed in normal 
   font shape.   
 - New macro jourvolstring which introduces the volume of
   an article entry. The default is a space (as it was the
   case before), but you can adjust it to your needs, e.g.:
   \renewcommand*{\jourvolstring}{\addspace vol\adddot\space}
 - New macro journumstring which introduces the number in
   article entries, if the option journumafteryear is set
   to true. The default for this macro is a comma, 
   followed by the bibstring number and a non-breakable 
   space. You can redefine it to your needs, e.g.:
   \renewcommand*{\journumstring}{\addspace} 
 - If there is no volume in an article entry, but the month
   field is set, the date is separated from the journal 
   title by a comma and a space, not only a space.
 - Fixed some BUGS concerning the xref functionality. 
 - Reorganized some bibliography drivers.
 - Enhanced the documentation.

v1.2e [2008/12/19]
 - Adjustments to biblatex version 0.8b. Note that from 
   this version on biblatex 0.8b is required, so you have to
   update biblatex as well if you would like to use 
   biblatex-dw 1.2e!
   -> The new biblatex option usetranslator is supported.
 - BUGFIX: The option firstfullname introduced in version
   1.2d had a bug which is now fixed.
 - BUGFIX: The idem functionality did not work with the 
   multicite commands. This is now fixed.
 - New option journumafteryear: If set to true, the 
   number in article entries is printed after the year and
   introduced by the bibstring number. If set to false,
   the default behaviour is used, i.e. Journaltitle 
   volume.number (year). The default is true.
   -> If journumafteryear is set false, the separator
      between volume and number in @article entries is now
      configurable with the new command \jourvolnumsep. 
      The default is a dot (which is also the default in
      biblatex).
 - When the volume is missing, the parenthesis around the
   year in @article entries is omitted.
 - The multicite command \cites is now also always printed 
   as footnote in footnote-dw.
 - Some changes in the internal code.
 - Extended the documentation and examples.

v1.2d [2008/12/07]
 - BUGFIX: In footnote-dw, the punctuation after the author/
   editor in all citations but the first one was always a 
   comma and not configurable by \citenamepunct. This is now 
   fixed.
 - New option firstfullname: when set to true, the 
   commands \citeauthor and \textcite (with footnote-dw: 
   \citeauthor only) give the full name of authors/editors 
   when they have not been cited before, not only the last 
   name. The default is false.
 - Support for biblatex version 0.8a including 
   \MakeSentenceCase.
 - Added lbx files with alternative strings for German and 
   additional strings for both German and English (these 
   strings were already included, but are now stored in the 
   language mapping files).

v1.2c [2008/11/15]
 - New option idembibformat: When using idembib=true, 
   you can choose whether you want to have an idem string 
   in the bibliography (idembibformat=idem) or a dash 
   (idembibformat=dash), as is the standard setting in 
   biblatex. The standard is idembibformat=idem.
 - Option idembib changed: Now false means that 
   subsequent entries of the same author are given with full 
   names, not a dash (as was the behaviour up to now). The 
   standard is idembib=true.
 - Improved xref support: The child entry does not only scan
   for the volume field of the parent entry, but prints 
   also location and year, if they differ from the 
   parent entry.
   
v1.2b [2008/11/09]
 - BUGFIX: With xref=true, the first (full) citation did 
   not show the overall pages of @INBOOK, @INCOLLECTION and 
   @INPROCEEDINGS entries. This is now fixed.
 - New option nolocation. If set to true, the location 
   and the publisher are omitted (even if you set 
   nopublisher=false). The default is false, i.e. the 
   location is printed.
 - The option shorthandibid can now also be used on a 
   per-entry basis.
 - Improved xref support: If the volume field of a child 
   entry is set and the volume field of the corresponding 
   parent entry is not set, the volume of the child entry 
   will be printed immediately before the pages.

v1.2a [2008/10/19]
 - Improved option edsuper which also outputs non-integer 
   editions (though not as superscript, but rather similar 
   to a note.) 
 - The field origpublisher (new in biblatex 0.8) is now
   also supported.
 - New option origfields which can take the values true 
   (standard) and false. With this option, you can now 
   decide, whether you want to have the fields 
   origlocation, origpublisher and origyear to be 
   printed or not.
   -> New option origfieldsformat=parens|brackets|punct. 
      The default is punct which means that the new 
      punctuation mark \origfieldspunct (default: 
      \addcomma\space) is used  to introduce the reprint 
      phrase. If you choose parens or brackets, the 
      reprint phrase is put in parentheses or brackets, 
      respectively, and the \origfieldspunct is ignored.
 - New option shorthandwidth. With this option you can set 
   the width of the label in the list of shorthands to any 
   length (e.g. 3em or 40pt). This is useful if you have 
   very long shorthands.
   -> New punctuation command \shorthandpunct which is 
      only exerted when you use the option shorthandwidth. 
      Then it is set to a colon. You can redefine this 
      punctuation command with \renewcommand.
   -> New length \shorthandsep which is only exerted if 
      you use the option shorthandwidth. The length 
      \shorthandsep defines the spacing after the label in 
      the list of shorthands. 
 - Improved package warnings.

v1.2 [2008/10/09]
 - Adjustments to biblatex version 0.8. Note that from 
   version 1.2 on, biblatex-dw needs at least biblatex 0.8, 
   so you have to update biblatex as well if you would like 
   to use biblatex-dw 1.2!
   -> The new biblatex option firstinits is supported.
   -> The new macro \bibpagespunct is also supported.
 - Added option xref which can be set to true or 
   false. If you want to use the crossref functionality 
   (introduced in biblatex-dw version 1.1f), you now have to 
   set xref=true. See the documentation for details.
 - As biblatex 0.8 has changed the handling of the field 
   edition, the option edsuper had to be adjusted. See 
   the documentation of biblatex-dw for details.
 - Updated the documentation.

v1.1h [2008/09/24]
 - BUGFIX: When using the options edbeforetitle and 
   edbyidem, the idem funcionality did not work. This is 
   now fixed.
 - Updated documentation (see especially, if you are using 
   the crossref functionality) and examples.
 
v1.1g [2008/09/05]
 - The biblatex package option mincrossrefs is set to 1 
   (instead of 2). The reason is that otherwise entries 
   that are using the crossref functionality introduced in 
   biblatex-dw version 1.1f could be incomplete.
 - If both volumes and volume are present, volumes is 
   now set before volume.

v1.1f [2008/08/10]
 - BUGFIX: Corrected wrong punctuation when using idembib=
   false in conjunction with an editor.
 - Added crossref functionality (using biblatexs field 
   xref). This works for authortitle-dw as well as 
   footnote-dw. For further information please have a look 
   into the package documentation.

v1.1e [2008/06/13]
 - BUGFIX: The option edbeforetitle caused a problem
   when used together with the idem functionality
   (which is the default). This is now fixed. 
 - Enhanced the idem functionality: If a citation with 
   shorthand precedes a citation of the same author or 
   editor without shorthand, the string idem is now 
   replaced by the authors or editors name, since this
   information cannot be gathered from the shorthand 
   citation and thus could mislead the reader.

v1.1d [2008/06/05]
 - BUGFIX: The global option oldauthor which was 
   introduced in version 1.1c caused an erroneous behaviour 
   when used together with idembib=true (which is the 
   default). This is now fixed.
 - New option editorstring which can take the values 
   parens, brackets and normal; the default is 
   parens. This option sets the string editor 
   (abbreviated ed.) in parentheses or in brackets, or 
   just puts the string (with a preceding comma) after the 
   editor name.
 - New option edbeforetitle which can take the values 
   true and false; the default is false. When set to 
   true, the editor in @INCOLLECTION and @INPROCEEDINGS 
   entries will be typeset before the booktitle (... in: 
   Editor (ed.): Booktitle ...) rather than afterwards 
   (... in: Booktitle, ed. by Editor ...).
 - Small correction in the terse version of the List of 
   Shorthands concerning the punctuation after authors/
   editors.
 - Added missing bibliography drivers for option edbyidem.

v1.1c [2008/05/29]
 - BUGFIX: With the option idem=false, the author of a 
   first citation who was cited immediately before with 
   another work lacked the forename.
 - BUGFIX: The option edbyidem=false produced a 
   superfluous ed. by string.
 - BUGFIX: Small punctuation issue with repeated citations 
   and herename. 
 - New option namefont which can take the values 
   smallcaps, italic and bold. The default is none, 
   i.e. authors and editors are set in normal font shape. 
   With useprefix=true, this option also affects the 
   name prefix.
 - New option firstnamefont which can take the values 
   smallcaps, italic and bold. This also affects the 
   name prefix (with useprefix=false) and the name 
   affix.
 - The option oldauthor is now also available as global 
   option in order to disable the feature. If you set 
   oldauthor=false globally, every entry option 
   oldauthor=true is ignored. Thus, you can set the 
   fontname for every author with global options, 
   independent of entry options. 

v1.1b [2008/04/13]
 - BUGFIX: When using \parencite with footnote-dw,  
   additional parentheses (e.g. enclosing the string
   editor) were lost; they are now replaced by brackets. 
 - BUGFIX: In footnote-dw, the normal \cite command 
   always produced a capital letter at the beginning. This
   is fixed now.
 - Fixed a small punctuation error in connection with 
   herename.
 - New command \titleaddonpunct for the punctuation before 
   titleaddon, booktitleaddon and maintitleaddon. The 
   default is a period now (not a comma, as before).
 
v1.1a [2008/02/09]
 - BUGFIX: When using the commands mancite or 
   citereset, the idem functionality was not reset. 
   This is now fixed.
 - New option edsuper. If set to true, the edition is 
   printed as superscript number (not as ordinal number) 
   straight ahead of the year. The default is false.
 - New option firstfull (only in authortitle-dw). If 
   set to true, the first citation is a fullcite. The 
   default is false.
 - Option citedas is now also available for 
   authortitle-dw and used when firstfull is set to 
   true.
   
v1.1 [2008/02/01]
 - BUGFIX: The citedas functionality did not work if the 
   first citation of an entry was introduced by idem.
 - New option terselos introduced for a terse version of 
   the list of shorthands (default is true).
 - New option herename introduced to specify if the term 
   \enquote{here} should prelude the pages of a fullcite 
   (or, with footnote-dw, also the first citation of an 
   entry) which has a non-empty \texttt{pages}-field.
 - New option nopublisher introduced to suppress the 
   publisher. The default value is true, but if you want 
   to have the publisher printed, you now can set the 
   option nopublisher=false.
 - If the field origlocation is given, it will be set 
   together with origyear, whereas location and year
   are appended in parentheses, preluded by the bibstring 
   reprint.
 - The options annotation and library are now also 
   usable with the style footnote-dw. The annotations 
   and library information are only printed in the 
   bibliography (if there is one), not in the citations or 
   in the list of shorthands.
 - Updated documentation.  

v1.01 [2008/01/20]  
 - BUGFIX: The pagetracker functionality did not work 
   properly with the style footnote-dw
 - Excluded ISBN/ISSN and DOI also from entry types 
   booklet, inproceedings, manual, misc, periodical, 
   proceedings, and report
 - Punctuation corrections for the same entry types 
   concerning the series+number  

v1.0 [2008/01/14]
 - Initial release
